Test station for magnetization measurements on large quantities of superconducting strands

In the superconducting main magnets Large Hadron Collider (LHC), persistent currents In me superconductor determine the field quality at injection Weld. For this reason it is necessary to check the magnetization of the cable strands during their production. During four years, this requires measurements of the width of the strand magnetization hysteresis loop at 0.5 T, 1.9 K, at a rate of up to eight samples per day, This paper describes the design, construction and the first results of a magnetization test station built for this purpose. The samples are cooled in a cryostat, with a 2-m long elliptic tail, This tail is inserted in a normal conducting dipole magnet with a field between +/- 1.5 T, Racetrack pick-up coils, integrated in the cryostat, detect the voltage due to flux change, which is then integrated numerically. The sample holder can contain eight strand samples, each 20 cm long. The test station operates in two modes: either the sample is fixed while the external field is changed, or the sample is moved while the field remains constant. First results of calibration measurements with nickel and niobium are reported.