High-rate mode II fracture toughness testing of polymer matrix composites using the Transverse Crack Tension (TCT) test

被引：6

作者：

Hahn, Philipp ^{[1
]}

Channammagari, Harichandana ^{[1
]}

Imbert, Mathieu ^{[1
]}

May, Michael ^{[1
]}

机构：

[1] Ernst Mach Inst, Fraunhofer Inst High Speed Dynam, Ernst Zermelo Str 4, D-79104 Freiburg, Germany

来源：

COMPOSITES PART B-ENGINEERING | 2022年 / 233卷

关键词：

Delamination; Fracture toughness; Mechanical testing; Rate effect; DELAMINATION; SPECIMENS; THICKNESS; STRESS;

D O I：

10.1016/j.compositesb.2022.109636

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper describes the novel high-rate transverse crack tension (TCT) test to determine mode II fracture toughness for high strain rates and compares this to quasi-static fracture toughness obtained with the standardized End Notch Flexure (ENF) test and the modified Transverse Crack Tension (mTCT) test suggested in the literature. The novel, miniaturized mTCT specimen is used to determine the fracture toughness under quasi-static and high-rate loading conditions with an electro-mechanical test machine and a Split Hopkinson Tension bar, respectively. For the high-rate tests, almost no interfering oscillations were observed in the load signal. A novel data reduction scheme allows achieving repeatable results with a very small standard deviation. The fracture toughness for the tested composite at a loading rate of about 5 m/s was found to be at least 50% higher than the one obtained under quasi-static loading.

引用

页数：8

共 50 条

[1] High-rate mode II fracture toughness testing of polymer matrix composites using the Transverse Crack Tension (TCT) test
Hahn, Philipp
Channammagari, Harichandana
Imbert, Mathieu
May, Michael
Composites Part B: Engineering, 2022, 233
[2] High-rate mode II fracture toughness testing of polymer matrix composites - A review
May, Michael
Channammagari, Harichandana
Hahn, Philipp
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2020, 137
[3] Experimental aspects of Mode I and Mode II fracture toughness testing of fibre-reinforced polymer-matrix composites
Brunner, AJ
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2000, 185 (2-4) : 161 - 172
[4] Fracture toughness and crack resistance curves for fiber compressive failure mode in polymer composites under high rate loading
Kuhn, P.
Catalanotti, G.
Xavier, J.
Camanho, P. P.
Koerber, H.
COMPOSITE STRUCTURES, 2017, 182 : 164 - 175
[5] Extending the modified transverse crack tensile test for mode II fracture toughness characterisation of hybrid interfaces
Scalici, Tommaso
Dalli, Denis
Ullah, Zahur
Catalanotti, Giuseppe
COMPOSITES PART B-ENGINEERING, 2025, 291
[6] Effect of compressive transverse normal stress on mode II fracture toughness in polymeric composites
Qida Bing
C. T. Sun
International Journal of Fracture, 2007, 145 : 89 - 97
[7] Effect of compressive transverse normal stress on mode II fracture toughness in polymeric composites
Bing, Qida
Sun, C. T.
INTERNATIONAL JOURNAL OF FRACTURE, 2007, 145 (02) : 89 - 97
[8] Mode II interlaminar crack growth process in polymer matrix composites
Lee, SM
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1999, 18 (13) : 1254 - 1266
[9] Mode II interlaminar crack growth process in polymer matrix composites
Lee, SM
PROCEEDINGS OF THE EIGHTH JAPAN-U.S. CONFERENCE ON COMPOSITE MATERIALS, 1999, : 608 - 617
[10] The loading rate effect on Mode II fracture toughness of composites interleaved with CNT
Lyashenko-Miller, T.
Fitoussi, J.
Marom, G.
NANOCOMPOSITES, 2016, 2 (01) : 1 - 7

← 1 2 3 4 5 →