Influence of ABS Type and Compatibilizer on the Thermal and Mechanical Properties of PC/ABS Blends

被引：12

作者：

Debbah, I ^{[1
]}

Krache, R. ^{[1
]}

Aranburu, N. ^{[2
]}

Etxeberria, A. ^{[2
]}

Perez, E. ^{[3
]}

Benavente, R. ^{[3
]}

机构：

[1] Univ Ferhat Abbas Setif 1, Fac Technol, Lab Mat Polymer Multiphas, Setif, Algeria

[2] Univ Basque Country, UPV EHU, Dept Polymer Sci & Technol, Polymat, Donostia San Sebastian, Spain

[3] CSIC, Inst Ciencia & Tecnol Polimeros, Juan Cierva 3, E-28006 Madrid, Spain

来源：

INTERNATIONAL POLYMER PROCESSING | 2020年 / 35卷 / 01期

关键词：

ACRYLONITRILE-BUTADIENE-STYRENE; G-MAH; REACTIVE COMPATIBILIZATION; FINAL PERFORMANCE; IMPACT MODIFIER; POLYMER BLENDS; RUBBER CONTENT; POLYCARBONATE; MORPHOLOGY; MISCIBILITY;

D O I：

10.3139/217.3858

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The present work aimed to study the influence of ABS type and compatibilizer on the thermal and mechanical properties of PC/ABS blends. For that, blends of PC with two types of ABS, with different rubber content, were prepared at 70 wt% of PC and 30 wt% of ABS, without and with compatibilizer at loadings of 1, 3 and 5 wt%. The effectiveness of those formulations was examined by means of morphological (SEM), thermal (DSC, TGA) and mechanical (tensile and microhardness) properties. It was shown that the compatibilizer had in general beneficial effects on the global properties of PC/ABS blends, and that the optimal amount of compatibilizer depends on the ABS type.

引用

页码：83 / 94

页数：12

共 50 条

[1] INFLUENCE OF ABS TYPE ON MORPHOLOGY AND MECHANICAL-PROPERTIES OF PC/ABS BLENDS
LOMBARDO, BS
KESKKULA, H
PAUL, DR
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1994, 54 (11) : 1697 - 1720
[2] Dynamic mechanical thermal properties of polycarbonate/ABS blends: Influence of ABS type and compatiblizer
Bai, Yu
Wang, Rongwei
Du, Qiangguo
Wang, Jian
[J]. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2011, 242
[3] Influence of compatibilizer on mechanical, morphological and rheological properties of PP/ABS blends
Sateesh Bonda
Smita Mohanty
Sanjay K. Nayak
[J]. Iranian Polymer Journal, 2014, 23 : 415 - 425
[4] Influence of compatibilizer on mechanical, morphological and rheological properties of PP/ABS blends
Bonda, Sateesh
Mohanty, Smita
Nayak, Sanjay K.
[J]. IRANIAN POLYMER JOURNAL, 2014, 23 (06) : 415 - 425
[5] Influence of dual compatibilizer and carbon black on mechanical and thermal properties of PP/ABS blends and their composites
Lohar, Ganesh
Tambe, Pankaj
Jogi, Bhagwan
[J]. COMPOSITE INTERFACES, 2020, 27 (12) : 1101 - 1136
[6] Rheological and mechanical properties of ABS/PC blends
Khan, MMK
Liang, RF
Gupta, RK
Agarwal, S
[J]. KOREA-AUSTRALIA RHEOLOGY JOURNAL, 2005, 17 (01) : 1 - 7
[7] Thermal, mechanical, and diffusional properties of nylon 6/ABS polymer blends: Compatibilizer effect
Jang, SP
Kim, D
[J]. POLYMER ENGINEERING AND SCIENCE, 2000, 40 (07): : 1635 - 1642
[8] Influence of compatibilizer and carbon nanotubes on mechanical, electrical, and barrier properties of PTT/ABS blends
Braga, Natália F.
LaChance, Anna Marie
Liu, Bin
Sun, Luyi
Passador, Fabio R.
[J]. Advanced Industrial and Engineering Polymer Research, 2019, 2 (03): : 121 - 125
[9] Thermomechanical properties of ABS/PA and ABS/PC blends
A. Guinault
C. Sollogoub
[J]. International Journal of Material Forming, 2009, 2
[10] Effect of rubber content of ABS on properties of PC/ABS blends. 1. Rheological, mechanical, and thermal properties
Nigam, I
Nigam, D
Mathur, GN
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2005, 44 (05) : 815 - 832

← 1 2 3 4 5 →