Series resonant high-voltage DC-DC converter with reduced component count

This paper proposes a novel zero-current-switching series resonant high-voltage DC-DC converter with reduced component count. The series resonant inverter in the proposed topology has two power switches (insulated-gate bipolar transistors, IGBTs), two resonant capacitors, and only one high-voltage transformer (HVT) with center-tapped primary windings. The power switches are connected in the form of a half-bridge network. The leakage inductances of the transformer's primary windings together with the resonant capacitors form two series resonant circuits. The series resonant circuits are fed alternately by operating the power switches with interleaved half switching cycle. The secondary winding of the HVT is connected to a bridge rectifier circuit to rectify the secondary voltage. The converter operates in the discontinuous conduction mode (DCM) and its output voltage is regulated by pulse frequency modulation. Therefore, all the power switches turn on and off at the zero-current switching condition. The main features of the proposed converter are its lower core loss, lower cost, and smaller size compared to previously proposed double series resonant high voltage DC-DC converters. The experimental results of a 130-W prototype of the proposed converter are presented. The results confirm the excellent operation and performance of the converter. (c) 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.