Application of Semi-Active Inerter in Semi-Active Suspensions Via Force Tracking

This paper investigates the application of semi-active inerter in semi-active suspension. A semi-active inerter is defined as an inerter whose inertance can be adjusted within a finite bandwidth by online control actions. A force-tracking approach to designing semiactive suspension with a semi-active inerter and a semi-active damper is proposed in this paper. Two parts are required in the force-tracking strategy: a target active control law and a proper algorithm to adjust the inertance and the damping coefficient online to track the target active control law. The target active control law is derived based on the state-derivative feedback control methodology in the " reciprocal state-space" (RSS) framework, which has the advantage that it is straightforward to use the acceleration information in the controller design. The algorithm to adjust the inertance and the damping coefficient is to saturate the active control force between the maximal and the minimal achievable suspension forces of the semi-active suspension. Both a quarter-car model and a full-car model are considered in this paper. Simulation results demonstrate that the semi-active suspension with a semi-active inerter and a semi-active damper can track the target active control force much better than the conventional semi-active suspension (which only contains a semi-active damper) does. As a consequence, the overall performance in ride comfort, suspension deflection, and road holding is improved, which effectively demonstrates the necessity and the benefit of introducing semi-active inerter in vehicle suspension.