Smooth fine-grained diamond coatings on titanium alloy for mechanical applications

被引：25
|
作者：
De Barros, MI
Vandenbulcke, L
Chinsky, L
Rats, D
von Stebut, J
机构：
[1] CNRS, Lab Combust & Syst Reactifs, F-45071 Orleans 2, France
[2] Univ Paris 06, Lab Physicochim Biomol & Cellulaire, F-75252 Paris 5, France
[3] Ecole Mines Nancy, Lab Sci & Genie Surfaces, F-54042 Nancy, France
来源：
DIAMOND AND RELATED MATERIALS | 2001年 / 10卷 / 3-7期
关键词：
smooth fine-grained diamond; visible and UV Raman spectroscopy; hardness; Young's modulus;
D O I：
10.1016/S0925-9635(00)00433-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Smooth, fine-grained diamond coatings have been deposited on titanium alloy by a two-step microwave PACVD process at 600 degreesC. Their morphology and roughness were studied by scanning electron microscopy and atomic force microscopy in comparison with polycrystalline coatings. The diamond purity of all these coatings in terms of sp(3) bonding fraction was deduced from visible and UV Raman spectroscopy as a function of the deposition conditions. Finally, the influence of diamond purity on hardness, Young's modulus and residual stresses of the coatings are reported. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：337 / 341
页数：5
相关论文
共 50 条
  • [1] Characterisation of smooth fine-grained diamond coatings on titanium alloy by TEM/EELS, Raman spectroscopy and X-ray diffraction
    De Barros, MI
    Serin, V
    Vandenbulcke, L
    Botton, G
    Andreazza, P
    Phaneuf, MW
    DIAMOND AND RELATED MATERIALS, 2002, 11 (08) : 1544 - 1551
  • [2] Deposition, structure, mechanical properties and tribological behavior of polycrystalline to smooth fine-grained diamond coatings
    Vandenbulcke, L
    De Barros, MI
    SURFACE & COATINGS TECHNOLOGY, 2001, 146 : 417 - 424
  • [3] Microstructure of fine-grained β-type titanium alloy produced by mechanical alloying and consolidation process
    Tsuchiyama, T.
    Hamamoto, S.
    Nakashima, K.
    Takaki, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 474 (1-2): : 120 - 127
  • [4] Mechanical behavior of a fine-grained duplex γ-TiAl alloy
    Z. Jin
    C. Cady
    G. T. Gray
    Y. -W. Kim
    Metallurgical and Materials Transactions A, 2000, 31 : 1007 - 1016
  • [5] Deposition of smooth diamond coatings on titanium alloy.
    Vandenbulcke, L
    De Barros, MI
    COMPTES RENDUS DE L ACADEMIE DES SCIENCES SERIE II FASCICULE C-CHIMIE, 2000, 3 (01): : 21 - 25
  • [6] Mechanical behavior of a fine-grained duplex γ-TiAl alloy
    Jin, Z
    Cady, C
    Gray, GT
    Kim, YW
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (3A): : 1007 - 1016
  • [7] MECHANICAL-PROPERTIES OF FINE-GRAINED SUBSTOICHIOMETRIC TITANIUM CARBIDE
    MIRACLE, DB
    LIPSITT, HA
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1983, 66 (08) : 592 - 597
  • [8] Mechanical behavior of a fine-grained duplex &gamma'-TiAl alloy
    Jin Z.
    Cady C.
    Gray III G.T.
    Kim Y.-W.
    Metallurgical and Materials Transactions A, 2000, 31 (13) : 1007 - 1016
  • [9] Fabrication and characterization of ultra fine-grained diamond coatings on the interior hole surface
    Ma, Y. P.
    Chen, M.
    Xiang, D. H.
    Sun, F. H.
    ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, 2006, : 629 - +
  • [10] Fabrication and characterisation of ultra fine-grained diamond coatings on the interior hole surface
    Ma, Y.
    Chen, M.
    Xiang, D.
    Sun, F.
    INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY, 2007, 29 (2-4) : 220 - 224
12345