Effects of Recrystallization Temperature On The Mechanical Properties of CuZn30 Alloy

被引：0

作者：

Muhammed, Ali ^{[1
]}

Abed, Abdulrahman ^{[1
]}

Mustafa, Mustafa Adnan ^{[1
]}

机构：

[1] Al Nahrain Univ, Dept Mech Engn, Baghdad, Iraq

来源：

2012 FIRST NATIONAL CONFERENCE FOR ENGINEERING SCIENCES (FNCES) | 2012年

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Brass C26000, (CuZn30) was annealed within the temperature range of 200 -700 degrees C, at different cooling rates, inside the furnace and in air. A correlation between the heat treatment, microstructure was evaluated; the tensile test and metallographic observations were carried out. The hardness was also measured. The investigations concerning the mechanical properties permitted to determine the effect of the temperature of recrystallization annealing on the strength and plastic properties of the investigated brass, increase of the annealing temperature within the range of 400-650 degrees C results in a deterioration of the mechanical properties of the brass CuZn30 and an increase of its plastic properties, which is fulfil the purpose of this investigation to determine optimum annealing condition for sheet metal forming.

引用

页数：6

共 50 条

[1] Influence of Cold Rolling on Microstructure, Mechanical Properties and Fracture Behavior of CuZn30 Brass Alloy
Taktak, Wafa
Elleuch, Riadh
DESIGN AND MODELING OF MECHANICAL SYSTEMS-VI, VOL 2, CMSM 2023, 2024, : 67 - 76
[2] Structural and Mechanical Properties of CuZn30 Cartridge Brass in Real Production Conditions
Lustinec, Jan
Rosko, Miroslav
Ocenasek, Vladivoj
MANUFACTURING TECHNOLOGY, 2023, 23 (06): : 846 - 852
[3] SELECTED PROPERTIES OF ALLOY 400 PROTECTIVE COATINGS COVERING CuZn30 BY ESD TECHNIQUE
Mlynarczyk, Piotr
Depczynski, Wojciech
Jasionowski, Robert
Skowron, Marek
27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 1246 - 1251
[4] Evaluation of effect of alloy elements in copper based CuSn10 and CuZn30 bearings on tribological and mechanical properties
Unlu, Bekir Sadik
Atik, Enver
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 489 (01) : 262 - 268
[5] Evaluation of effect of alloy elements in copper based CuSn10 and CuZn30 bearings on tribological and mechanical properties
Celal Bayar University, Vocational High School, Department of Machinery, 45400 Turgutlu, Manisa, Turkey
不详
J Alloys Compd, 1 (262-268):
[6] INVESTIGATING THE EFFECT OF MINIATURIZATION ON THE MICROTENSILE PROPERTIES OF BRASS (CuZn30)
Wuertemberger, Lauren B.
Chann, Megan N.
Onyancha, Richard M.
PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2011, VOL 1, 2011, : 527 - 532
[7] High temperature plastic deformation of CuZn30 brass - calculation of the activation energy
Pernis, R.
Kasala, J.
Boruta, J.
KOVOVE MATERIALY-METALLIC MATERIALS, 2010, 48 (01): : 41 - 46
[8] INFLUENCE OF THE STRAIN RATE ON THE PLC EFFECT AND ACOUSTIC EMISSION IN SINGLE CRYSTALS OF THE CuZn30 ALLOY COMPRESSED AT AN ELEVATED TEMPERATURE
Ozgowicz, Wojciech
Grzegorczyk, Barbara
Pawelek, Andrzej
Piatkowski, Andrzej
Ranachowski, Zbigniew
MATERIALI IN TEHNOLOGIJE, 2015, 49 (02): : 197 - 202
[9] Effect of Grain Refinement by Zirconium on the Morphology of Solidification, the Feeding Capacity and Mechanical Properties of Brass CuZn30 and Silicon Brass CuZn15Si4.
Romankiewicz, Ferdynand
Ellerbrok, Rainer
Engler, Siegfried
Giessereiforschung, 1987, 39 (01): : 25 - 33
[10] Influence of Selected Factors of Vibratory Work Hardening Machining on the Properties of CuZn30 Brass
Bankowski, Damian
Kiljan, Anna
Hlavacova, Irena M.
Mlynarczyk, Piotr
MATERIALS, 2024, 17 (23)

← 1 2 3 4 5 →