Determination of cohesive zone model parameters for tape delamination based on tests and finite element simulations

被引：3
|
作者：
Park, Seung-Yeun [1 ]
Jeong, Hyun-Yong [1 ]
机构：
[1] Sogang Univ, Dept Mech Engn, Seoul 04107, South Korea
来源：
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2022年 / 36卷 / 11期
关键词：
Bilinear cohesive zone model; Adhesive tape; Peel test; Double cantilever beam test; Finite element simulation;
D O I：
10.1007/s12206-022-1028-3
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Adhesive tapes are commonly used in electronics and automotive parts, and it is important to predict the peel force of the tapes by finite element simulations. Much research has been conducted to propose different functional forms of the cohesive zone model which are used in finite element simulations, but it is difficult to determine the parameters of those functional forms. In this study a methodology was proposed to determine the parameters of a bilinear cohesive zone model based on the results of the double cantilever beam test and several peel tests, and to predict the peel force at other peel tests by conducting finite element simulations. By comparing the estimated peel forces from finite element simulations to the measured peel forces, the methodology proposed in this study was proven to be simple yet effective.
引用
收藏
页码：5657 / 5666
页数：10
相关论文
共 50 条
  • [1] Determination of cohesive zone model parameters for tape delamination based on tests and finite element simulations
    Seung-Yeun Park
    Hyun-Yong Jeong
    [J]. Journal of Mechanical Science and Technology, 2022, 36 : 5657 - 5666
  • [2] Finite element analysis of delamination of a composite component with the cohesive zone model technique
    Lampani, Luca
    [J]. ENGINEERING COMPUTATIONS, 2011, 28 (1-2) : 30 - 46
  • [3] On cohesive element parameters and delamination modelling
    Lu, X.
    Ridha, M.
    Chen, B. Y.
    Tan, V. B. C.
    Tay, T. E.
    [J]. ENGINEERING FRACTURE MECHANICS, 2019, 206 : 278 - 296
  • [4] Finite element analysis of mode II delamination suppression in stitched composites using cohesive zone model
    Herwan, J.
    Kondo, A.
    Morooka, S.
    Watanabe, N.
    [J]. PLASTICS RUBBER AND COMPOSITES, 2015, 44 (09) : 390 - 396
  • [5] Cohesive zone length in numerical simulations of composite delamination
    Harper, Paul W.
    Hallett, Stephen R.
    [J]. ENGINEERING FRACTURE MECHANICS, 2008, 75 (16) : 4774 - 4792
  • [6] Finite element implementation and application of strength theory based cohesive zone model
    Shi T.-X.
    Zhang X.
    Wang Y.-Y.
    Zheng K.-H.
    Zhang Y.-Q.
    [J]. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2023, 57 (03): : 573 - 582
  • [7] Understanding the mechanical behavior of fiber/matrix interfaces during push-in tests by means of finite element simulations and a cohesive zone model
    Esque-de los Ojos, D.
    Ghisleni, R.
    Battisti, A.
    Mohanty, G.
    Michler, J.
    Sort, J.
    Brunner, A. J.
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2016, 117 : 330 - 337
  • [8] A string-based cohesive zone model for interlaminar delamination
    Zhang, Liang
    Gao, Zhenyuan
    Yu, Wenbin
    [J]. ENGINEERING FRACTURE MECHANICS, 2017, 180 : 1 - 22
  • [9] Determination of cohesive parameters for a mixed-mode cohesive zone model
    Lee, Min Jung
    Cho, Tae Min
    Kim, Won Seock
    Lee, Byung Chai
    Lee, Jung Ju
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2010, 30 (05) : 322 - 328
  • [10] Predicting environmental degradation of adhesive joints using a cohesive zone finite element model based on accelerated fracture tests
    Patil, O. R.
    Amieli, A.
    Datla, N. V.
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 76 : 54 - 60
12345