Investigation of micro burner performance during porous media combustion for surface and submerged flames

被引：2

作者：

Janvekar, Ayub Ahmed ^{[1
]}

Abdullah, M. Z. ^{[2
]}

Ahmad, Z. A. ^{[3
]}

Abas, Aizat ^{[1
]}

Hussien, Ahmed A. ^{[1
]}

Kataraki, Pramod S. ^{[1
]}

Mohamed, Mazlan ^{[1
,4
]}

Husin, Azmi ^{[1
,5
]}

Fadzli, Khairil ^{[2
,6
]}

机构：

[1] Univ Sains Malaysia, Sch Mech Engn, Engn Campus, Nibong Tebal 14300, Penang, Malaysia

[2] Univ Sains Malaysia, Sch Aerosp Engn, Engn Campus, Nibong Tebal 14300, Penang, Malaysia

[3] Sch Mat & Mineral Resources Engn, Engn Campus, Nibong Tebal 14300, Penang, Malaysia

[4] Univ Malaysia Kelantan, Fac Bioengn & Technol, Advances Mat Res Cluster, Jeli Campus, Jeli 17600, Kelantan, Malaysia

[5] Univ Teknol MARA, Fac Mech Engn, George Town 13500, Malaysia

[6] Univ Putra Malaysia, Dept Mech & Mfg Engn, Serdang 43400, Selangor, Malaysia

来源：

INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17) | 2018年 / 370卷

关键词：

D O I：

10.1088/1757-899X/370/1/012049

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

Porous media combustion is considered to be one of the popular choice due to its tremendous advantages. Such type of combustion liberates not only super stable flame but also maintains emissions parameters below thresholds level. Present study incorporates reaction and preheat layer with discrete and foam type of materials respectively. Burner was made to run in ultra-lean mode. Optimum equivalence ratio was found out to be 0.7 for surface flame, while 0.6 during submerged flame condition. Maximum thermal efficiency was noted to be 81%. Finally, emissions parameters where recorded continuously to measure NOx and CO, which were under global limits.

引用

页数：7

共 50 条

[1] Assessment of Porous Media Burner for Surface/Submerged Flame During Porous Media Combustion
Janvekar, Ayub Ahmed
Abdullah, M. Z.
Ahmad, Z. A.
Abas, Aizat
Hussien, Ahmed A.
Bashir, Musavir
Azam, Qummare
[J]. ENGINEERING INTERNATIONAL CONFERENCE (EIC) 2016, 2017, 1818
[2] Influence of reaction layer thickness on surface/submerged flame during porous media combustion of micro burner
Janvekar, Ayub Ahmed
Abdullah, M. Z.
Ahmad, Zainal Arifin
Abas, Aizat
Ismail, A. K.
Akhtar, Mohammad Nishat
Ishak, Hafifi Hafiz
Mohamed, Mazlan
[J]. TARUMANAGARA INTERNATIONAL CONFERENCE ON THE APPLICATIONS OF TECHNOLOGY AND ENGINEERING, 2019, 508
[3] Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner
Janvekar, Ayub Ahmed
Miskam, M. A.
Abas, Aizat
Ahmad, Zainal Arifin
Juntakan, T.
Abdullah, M. Z.
[J]. ENERGY, 2017, 122 : 103 - 110
[4] Experiential study on temperature and emission performance of micro burner during porous media combustion
Janvekar, Ayub Ahmed
Abdullah, M. Z.
Ahmad, Z. A.
Abas, A.
Ismail, A. K.
Hussien, A. A.
Kataraki, P. S.
Ishak, M. H. H.
Mazlan, M.
Zubair, A. F.
[J]. INTERNATIONAL CONFERENCE ON AEROSPACE AND MECHANICAL ENGINEERING (AEROMECH17), 2018, 370
[5] Assessment of porous media combustion with foam porous media for surface/submerged flame
Janvekar, Ayub Ahmed
Abdullah, M. Z.
Ahmad, Zainal Arifin
Abas, Aizat
Hussien, Ahmed A.
Bashir, Musavir
Azam, Qummare
Desai, Mohammed Ziad
[J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (10) : 20865 - 20873
[6] Development of foam porous media to undergo surface and submerged flame during premixed combustion
Janvekar, Ayub Ahmed
Abdullah, M. Z.
Ahmad, Zainal Arifin
Abas, Aizat
Kataraki, Pramod S.
Ismail, A. K.
Akhtar, Mohammad Nishat
Ishak, Hafifi Hafiz
Mohamed, Mazlan
[J]. 1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505
[7] Visual investigation on optimizing combustion characteristic of porous media burner combined with bluff body
Dai, Huaming
Dai, Hongchao
Zhang, Bingqian
[J]. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (03) : 7972 - 7986
[8] Numerical Study On the Premixed Combustion in Porous Media Burner
Zhang, Jinyan
Liu, Hongsheng
Xu, Zhenjie
[J]. ADVANCES IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2, 2013, 614-615 : 73 - +
[9] Experimental Evaluation of the Surface-Stabilized Combustion of a Confined Porous Inert Media Burner
Echeverri-Uribe, Camilo
Amell, Andres A.
[J]. COMBUSTION SCIENCE AND TECHNOLOGY, 2020, 192 (02) : 335 - 358
[10] Effect of Ultra-low Vegetable Oil Droplets on Microporous Media Burner Under Surface and Submerged Flames
Ayub Ahmed Janvekar
Aizat Abas
Zainal Arifin Ahmad
T. Juntakan
M. Z. Abdullah
[J]. Arabian Journal for Science and Engineering, 2019, 44 : 5921 - 5935

← 1 2 3 4 5 →