An Experimental Investigation of Heat Pipe flat-Plate Solar Collector with Water-Ethanol mixture as a Working Fluid

被引：1
|
作者：
Harde, Pravin R. [1 ]
Pise, A. T. [1 ]
Kusure, Balasao D. [1 ]
机构：
[1] Govt Coll Engn, Karad 415124, MS, India
来源：
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH | 2014年 / 592-594卷
关键词：
Solar collector; Heat pipe; efficiency; inclination angle; thermosyphon; NANOFLUID;
D O I：
10.4028/www.scientific.net/AMM.592-594.1413
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The objective of the present study is to investigate the performance of solar collector with serpentine shape of heat pipe and water-ethanol as a working fluid. Serpentine shape is easy of manufacturing and also to reduce cost of manufacturing. In this work, heat pipe is made from copper tube having ID 10mm and OD 12mm. The tube is bent in serpentine manner and filled with Water-ethanol as a working fluid with 70% filling ratio. The length of evaporator, adiabatic and condenser section was 480mm, 50mm and 65mm respectively. The test is conducted for coolant flow rate 4.5 kg/hr different angle of collector 20 degrees, 31.5 degrees, 40 degrees, 50 degrees, 60 degrees. Result shows that water-ethanol collector gives better performance than collector with water as a working fluid. Maximum efficiency is observed at 31.5 degrees inclination.
引用
收藏
页码：1413 / 1417
页数：5
相关论文
共 50 条
  • [1] Experimental analysis of a heat pipe operated solar collector using water-ethanol solution as the working fluid
    Jahanbakhsh, A.
    Haghgou, H. R.
    Alizadeh, S.
    [J]. SOLAR ENERGY, 2015, 118 : 267 - 275
  • [2] Experimental and numerical investigation of a flat-plate solar collector
    Alvarez, A.
    Cabeza, O.
    Muniz, M. C.
    Varela, L. M.
    [J]. ENERGY, 2010, 35 (09) : 3707 - 3716
  • [3] Numerical simulation investigation on thermal performance of heat pipe flat-plate solar collector
    Zhang, Dongwei
    Tao, Hanzhong
    Wang, Mimi
    Sun, Zishuai
    Jiang, Chuan
    [J]. APPLIED THERMAL ENGINEERING, 2017, 118 : 113 - 126
  • [4] An experimental investigation on the efficiency of a Flat-plate solar collector with binary working fluid: A case study of propylene glycol (PG)-water
    Shojaeizadeh, E.
    Veysi, F.
    Yousefi, T.
    Davodi, F.
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 53 : 218 - 226
  • [5] A study on a flat-plate type of solar heat collector with an integrated heat pipe
    Wei, Lingjiao
    Yuan, Dazhong
    Tang, Dawei
    Wu, Bangxian
    [J]. SOLAR ENERGY, 2013, 97 : 19 - 25
  • [6] Experimental analysis of a heat pipe operated solar collector using water-ethanol solution as the working fluid (vol 118, pg 267, 2015)
    Jahanbakhsh, A.
    Haghgou, H. R.
    Alizadeh, S.
    [J]. SOLAR ENERGY, 2015, 122 : 1429 - 1429
  • [7] EXPERIMENTAL INVESTIGATION OF A NEW FLAT PLATE SOLAR HEAT COLLECTOR BY MICRO HEAT PIPE ARRAY
    Zhao, Yao-Hua
    Zou, Fei-Long
    Diao, Yan-Hua
    Quan, Zhen-Hua
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 5: FUEL CELLS, GAS TURBINES, HEAT PIPES, JET IMPINGEMENT, RADIATION, 2010, : 361 - 368
  • [8] OPTIMIZATION OF FLAT-PLATE SOLAR-ENERGY HEAT PIPE COLLECTOR PARAMETERS
    VASILIEV, LL
    GRAKOVICH, LP
    KHRUSTALEV, DK
    [J]. JOURNAL OF HEAT RECOVERY SYSTEMS, 1984, 4 (03): : 157 - 164
  • [9] Investigation of the fluid temperature field inside a flat-plate solar collector
    Sandhu, Gurveer
    Siddiqui, Kamran
    [J]. HEAT AND MASS TRANSFER, 2014, 50 (11) : 1499 - 1514
  • [10] Investigation of the fluid temperature field inside a flat-plate solar collector
    Gurveer Sandhu
    Kamran Siddiqui
    [J]. Heat and Mass Transfer, 2014, 50 : 1499 - 1514
12345