Preparation of a novel composite geopolymer based on calcium carbide slag-fly ash and its characterization, mechanism and adsorption properties

In this study, a mixed precursor system of fly ash (50 wt%) and calcium carbide slag (50 wt%) was used to prepare the geopolymer, and the hydration and hardening mechanism of the whole system and the microscopic characterization of the calcium carbide-fly ash based polymer were investigated after the addition of calcium carbide slag. Ca(OH)(2) in calcium carbide slag can effectively excite the volcanic ash activity of fly ash, which leads to a more adequate geopolymerization reaction and produces more hydrated calcium silicate (C-S-H) gels. These gels have very high specific surface area and surface adsorption energy. The results showed that the specific surface area of geopolymer was as high as 79.76 m(2)/g, and through the study of its adsorption capacity of Cu(II) in aqueous solution, the results showed that its removal efficiency of Cu(II) was 97.63% and its adsorption capacity was 58.58 mg/g. By using fly ash and calcium carbide slag as the auxiliary raw materials for the preparation of geopolymer, it can not only promote the reaction of proceeding, but also as an excellent adsorption material, and also as an effective way to utilize industrial waste resources.