Compressive Strength Properties Perpendicular to the Grain of Hollow Glue-Laminated Timber Elements

被引:1
|
作者
Perkovic, Nikola [1 ]
Barbalic, Jure [1 ]
Rajcic, Vlatka [1 ]
Duvnjak, Ivan [1 ]
机构
[1] Univ Zagreb, Fac Civil Engn, Struct Dept, Zagreb 10000, Croatia
关键词
timber; compression strength; perpendicular to grain; glulam; innovative; hollow; FEM; STRUCTURAL TIMBER; BEHAVIOR; DESIGN; WOOD; CLT;
D O I
10.3390/polym14163403
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Timber is one of the fundamental materials of human civilization, it is very useful and ecologically acceptable in its natural environment, and it fits very well with modern trends in green construction. The paper presents innovative hollow glued laminated (GL) timber elements intended for log-house construction. Due to the lack of data on the behavior of the hollow timber section in compression perpendicular to the grain, the paper presented involves testing the compression strength of elliptical hollow cross-section glue-laminated timber specimens made of softwood and hardwood, as well as full cross-section glue-laminated softwood timber specimens. The experimental research was carried out on a total of 120 specimens. With the maximal reduction of 26% compared to the full cross-section, regardless of the type of wood and direction of load, the compression strength perpendicular to the grain of hollow specimens decreases by about 55% compared to the full cross-section, with the coefficient k(c,90) equal to 1.0. For load actions at the edge and the middle of the element, k(c,90) factors were obtained with a value closer to those obtained for full cross-section, which indicates the same phenomenology, regardless of cross-sectional weakening. At the same time, the factors in the stronger axis are lower by about 10%, and in the weaker axis by about 30% compared to those prescribed by the Eurocode. Experimental research was confirmed by FEM analysis. Comparative finite element analysis was performed in order to provide recommendations for future research and, consequently, to determine the optimal cross-section form of the hollow GL timber element. By removing the holes in the central part of the cross-section, the stress is reduced. The distance of the holes from the edges defines the local cracking. Finally, if the holes are present only in the central part of the element, the behavior of the element is more favorable.
引用
收藏
页数:20
相关论文
共 50 条
  • [1] Behavioral Assessment and Evaluation of Innovative Hollow Glue-Laminated Timber Elements
    Perkovi, Nikola
    Rajcic, Vlatka
    Pranjic, Monika
    [J]. MATERIALS, 2021, 14 (22)
  • [2] Compressive Strength Properties Perpendicular to the Grain of Larch Cross-laminated Timber
    Song, Yo-Jin
    Hong, Soon-Il
    [J]. BIORESOURCES, 2019, 14 (02) : 4304 - 4315
  • [3] Mechanical and Fire Performance of Innovative Hollow Glue-Laminated Timber Beams
    Perkovic, Nikola
    Rajcic, Vlatka
    [J]. POLYMERS, 2022, 14 (16)
  • [4] RELAXATION TESTS WITH GLUE-LAMINATED TIMBER SPECIMENS UNDER COMPRESSION PERPENDICULAR TO THE GRAIN CAUSED BY INCREASING MOISTURE-CONTENT
    STECK, G
    [J]. HOLZ ALS ROH-UND WERKSTOFF, 1987, 45 (04): : 137 - 140
  • [5] Compressive Strength Properties Perpendicular to the Grain of Cross-Laminated Timber (CLT) Composed of Sugi Laminations
    Ido, Hirofumi
    Nagao, Hirofumi
    Miura, Sachiko
    Miyatake, Atsushi
    [J]. MOKUZAI GAKKAISHI, 2014, 60 (01): : 16 - 22
  • [6] Selected Mechanical Properties of Glue-Laminated Timber Produced from Locally Repaired Timber
    Derkowski, Adam
    Kulinski, Marcin
    Trocinski, Adrian
    Krzosek, Slawomir
    Mirski, Radoslaw
    [J]. MATERIALS, 2022, 15 (22)
  • [7] An industry in transition: on the network of early glue-laminated timber production in Switzerland
    Rinke, Mario
    Haddadi, Roshanak
    [J]. CONSTRUCTION HISTORY-INTERNATIONAL JOURNAL OF THE CONSTRUCTION HISTORY SOCIETY, 2022, 37 (02): : 19 - 41
  • [9] Feasibility of portable NIR spectrometer for quality assurance in glue-laminated timber production
    Sandak, Jakub
    Niemz, Peter
    Haensel, Andreas
    Mai, Juana
    Sandak, Anna
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2021, 308
  • [10] FIRE RESISTANCE OF GLUE-LAMINATED TIMBER .1. FIRE RESISTANCE OF JOINTS
    UESUGI, S
    [J]. MOKUZAI GAKKAISHI, 1993, 39 (01): : 58 - 68