Preparation and electrochemical properties of nano-Si/C composites

被引:0
|
作者
Chen Xiao-hong [1 ]
Song Huai-he [1 ]
Yang Shu-bin [1 ]
机构
[1] Beijing Inst Chem Technol, State Key Lab Chem Resource Engn, Beijing 100029, Peoples R China
关键词
heavy oil; Si powders; composite; lithium ion secondary battery; anode materials;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A nano-Si/C composite as the anode material for a lithium-ion secondary battery was prepared by polymerization and condensation of petroleum heavy oil with dispersed nano-Si powders at 460 degrees C and carbonization at 900 degrees C. The influences of adding nano-Si powders to heavy oil on yield, microstructures and electrochemical properties were investigated. Results showed that the addition of nano-Si powders is beneficial for increasing the yield of solid products. Nano-Si powders were uniformly embedded in the carbon matrix and the crystallinity of nano-Si powders had no change before and after polymerization. The nano-Si/C composite had a first reversible capacity of 498 mAh/g and a cycle efficiency of 90 %.
引用
收藏
页码:235 / 241
页数:7
相关论文
共 35 条
  • [1] Amorphous silicon as a possible anode material for Li-ion batteries
    Bourderau, S
    Brousse, T
    Schleich, DM
    [J]. JOURNAL OF POWER SOURCES, 1999, 81 : 233 - 236
  • [2] Co-pyrolysis of an aromatic petroleum residue with triphenylsilane
    Carreira, P
    Martínez-Escandell, M
    Santamaría, R
    Rodríguez-Reinoso, F
    [J]. CARBON, 2001, 39 (07) : 1001 - 1011
  • [3] Dai GP, 2002, NEW CARBON MATER, V17, P71
  • [4] Carbon-coated silicon as anode material for lithium ion batteries: advantages and limitations
    Dimov, N
    Kugino, S
    Yoshio, M
    [J]. ELECTROCHIMICA ACTA, 2003, 48 (11) : 1579 - 1587
  • [5] Characterization of carbon-coated silicon - Structural evolution and possible limitations
    Dimov, N
    Fukuda, K
    Umeno, T
    Kugino, S
    Yoshio, M
    [J]. JOURNAL OF POWER SOURCES, 2003, 114 (01) : 88 - 95
  • [6] Carbon/Ba-Fe-Si alloy composite as high capacity anode materials for Li-ion batteries
    Dong, H
    Ai, XP
    Yang, HX
    [J]. ELECTROCHEMISTRY COMMUNICATIONS, 2003, 5 (11) : 952 - 957
  • [7] Preparation and performance of nickel-tin alloys used as anodes for lithium-ion battery
    Dong, QF
    Wu, CZ
    Jin, MG
    Huang, ZC
    Zheng, MS
    You, JK
    Lin, ZG
    [J]. SOLID STATE IONICS, 2004, 167 (1-2) : 49 - 54
  • [8] Recent development of carbon materials for Li ion batteries
    Endo, M
    Kim, C
    Nishimura, K
    Fujino, T
    Miyashita, K
    [J]. CARBON, 2000, 38 (02) : 183 - 197
  • [9] Hasegawa T, 2004, CARBON, V42, P2573, DOI [10.1016/j.carbon.2004.05.050, 10.1016/j.carbon.2004.050.50]
  • [10] [黄学杰 Huang Xuejie], 2002, [物理, Physics], V31, P444