Study on the Cutting Force of Inconel 718 Machined by Different Cutting Tools

被引：1
|
作者：
Geng, G. S. [1 ,2 ]
Xu, J. H. [2 ]
Fu, Y. C. [2 ]
Yang, B. [2 ]
Su, L. L. [2 ]
机构：
[1] Nanjing Agr Univ, Coll Engn, Nanjing 210031, Jiangsu, Peoples R China
[2] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Jiangsu, Peoples R China
来源：
HIGH SPEED MACHINING | 2011年 / 188卷
关键词：
Cutting force; Inconel; 718; Turning; SPEED; STRESSES;
D O I：
10.4028/www.scientific.net/AMR.188.15
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel 718 is widely used in aerospace, nuclear power and gas turbine industries. On the other side, it is well known as one of the most difficult-to-cut super alloy and its efficient machining assumes a lot of importance. Therefore, this paper presents an experimental investigation on the cutting force of Inconel 718 machined with several different kinds of cutting tools. Both single-factor and orthogonal experiments were carried out with cemented carbide, cermet and CBN tools. The effects of cutting tools and cutting parameters on the cutting force are investigated and the optimal cutting conditions are recommended.
引用
收藏
页码：15 / +
页数：2
相关论文
共 50 条
  • [1] Surface Roughness and Cutting Force of Inconel 718 Machined by Different Cutting Tools
    Geng, G. S.
    Xu, J. H.
    Fu, Y. C.
    Yang, B.
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 232 - +
  • [2] An investigation on the cutting force of milling Inconel 718
    Tsai, Jhy-Cherng
    Kuo, Chung-Yu
    Liu, Zing-Ping
    Hsiao, Kelvin Hsi-Hung
    [J]. SIXTH INTERNATIONAL MULTI-CONFERENCE ON ENGINEERING AND TECHNOLOGY INNOVATION 2017 (IMETI 2017), 2018, 169
  • [3] Experimental study on cutting force of face-turning Inconel718 with ceramic tools and carbide tools
    Yao, Changfeng
    Zhou, Zheng
    Zhang, Jiyin
    Wu, Daoxia
    Tan, Liang
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (07) : 1 - 9
  • [4] The prediction of cutting force in milling Inconel-718
    Kuo, CP
    Ling, CC
    Chen, SH
    Chang, CW
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (7-8): : 655 - 660
  • [5] The prediction of cutting force in milling Inconel-718
    Chun-Pao Kuo
    Cheng-Chang Ling
    Shao-Hsien Chen
    Chih-Wei Chang
    [J]. The International Journal of Advanced Manufacturing Technology, 2006, 27 : 655 - 660
  • [6] Modelling of cutting force in end milling Inconel 718
    Alauddin, M
    ElBaradie, MA
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 58 (01) : 100 - 108
  • [7] The Cutting Simulation of Inconel 718
    Ren, Jialong
    Zheng, QingYu
    Ren, He
    Zhang, Chunyan
    [J]. ADVANCES IN MECHATRONICS TECHNOLOGY, 2011, 43 : 717 - 721
  • [8] Influence of the cutting-edge preparation in ceramic tools for grooving of Inconel® 718 and force prediction
    Fernandez-Lucio, Pablo
    Urbikain, Gorka
    Plaza, Soraya
    Pereira, Octavio
    [J]. ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2024, 54
  • [9] The effect of cutting force and tool wear in milling INCONEL 718
    Kamdani, K.
    Ashaary, I
    Hassan, S.
    Lajis, M. A.
    [J]. INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME2018), 2019, 1150
  • [10] Milling Inconel 718 workpiece with cryogenically treated and untreated cutting tools
    Gurbuz, Huseyin
    Baday, Sehmus
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 116 (9-10): : 3135 - 3148
12345