Wear characteristic of surface hardened ausferritic Si-steel

被引：0
|
作者：
Esa, Vuorinen [1 ]
David, Pino [1 ]
Jonas, Lundmark [1 ]
Braham, Prakash [1 ]
机构：
[1] Lulea Univ Technol, S-97187 Lulea, Sweden
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2007年 / 14卷
关键词：
ausferrite; surface hardening; wear characteristics; Si-steel;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
High strength steels can be produced by austempering of Si-containing steels. It is possible to achieve high toughness and good wear resistance in these steels. Surface hardening of this group of steels can further increase the surface hardness and wear resistance and in combination with high strength in the bulk, also the fatigue strength. Surface hardening by laser-hardening has been performed on steel 55Si7 after austempering of the steel in order to create a ferritic-austenitic carbide free microstructure. Tempering effects and hardness values have been studied. Optical as well as scanning electron microscopy has been used together with x-ray diffractometry in the characterization of the micro-structural changes. Wear resistance testing of austempered and laser hardened samples respectively of the Si-alloyed steel have been reported and also compared with that of the conventional Cr-alloyed steel. The results of the specific phase transformation from austenite to martensite during wear process will be reported.
引用
收藏
页码：245 / 248
页数：4
相关论文
共 50 条
  • [1] Dynamics Characteristic of Cutter Wear in High Speed Milling Hardened Steel
    Jiang, Bin
    Qi, Changxing
    Xia, Danhua
    Cao, Shuai
    Chen, Bo
    ADVANCED SCIENCE LETTERS, 2011, 4 (8-10) : 3103 - 3107
  • [2] Wear and corrosion resistance of laser surface hardened structural steel
    Pantelis, DI
    Bouyiouri, E
    Kouloumbi, N
    Vassiliou, P
    Koutsomichalis, A
    SURFACE & COATINGS TECHNOLOGY, 2002, 161 (2-3): : 125 - 134
  • [3] FLANK WEAR AND SURFACE ROUGHNESS IN END MILLING OF HARDENED STEEL
    Jozic, S.
    Bajic, D.
    Stoic, A.
    METALURGIJA, 2015, 54 (02): : 343 - 346
  • [4] Thermomechanical processing of high Si-steel (up to 6.3% Si)
    Ros, T
    Houbaert, Y
    Fischer, O
    Schneider, J
    IEEE TRANSACTIONS ON MAGNETICS, 2001, 37 (04) : 2321 - 2324
  • [5] Research of Laser Welding for Hot Rolling Si-Steel Strip
    Zhong, Rutao
    Huang, Zhijun
    Wang, Liang
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1484 - 1487
  • [6] Wear Performance of Laser Surface Hardened GCr15 Steel
    雷声
    Journal of Wuhan University of Technology(Materials Science), 2010, (01) : 84 - 88
  • [7] Wear performance of laser surface hardened GCr15 steel
    Lei Sheng
    Liu Quankun
    Ma Yuping
    Ren Jingming
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2010, 25 (01): : 84 - 88
  • [8] Wear performance of laser surface hardened GCr15 steel
    Sheng Lei
    Quankun Liu
    Yuping Ma
    Jingming Ren
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2010, 25 : 84 - 88
  • [9] Twin morphology formed on Goss Si-steel single crystal
    Inokuti, Y
    Morita, H
    Tomobuchi, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2003, 89 (06): : 686 - 690
  • [10] The wear of annealed and hardened carbon steel
    Muller, W
    Leber, H
    ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1922, 66 : 543 - 546
12345