EXPERIMENTAL VERIFICATION AND FINITE ELEMENT ANALYSIS OF AUTOMOTIVE DOOR HINGE

被引：0
|
作者：
Dogan, S. [1 ]
Guven, C. [1 ]
Karpat, F. [2 ]
Yilmaz, T. G. [2 ]
Dogan, O. [2 ]
机构：
[1] Rollmech Co, TR-16059 Bursa, Turkey
[2] Uludag Univ, Dept Mech Engn, TR-16059 Bursa, Turkey
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 11 | 2015年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In automotive industry, achieving lightweight, low-cost, reliable and more accurate product design are the most important goal. Using Finite Element Analysis (FEA) is an important tool for achieving this since it decreases prototyping cost and time. Cars have different door system and one of the important part of them is door hinge. An automotive door hinge is mainly composed of three elements, fixed part, mobile part and hinge pin that fasten fixed part and mobile parts. Manufacturers have to perform tests and analysis for ensuring international and customer requirements. In this study, FEA results are compared with static and dynamic test results of front door hinge of automotive according to International specifications. The agreement between the computed and measured values is shown.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Thermoelastic instabilities in automotive disc brakes finite element analysis and experimental verification
    Yi, YB
    Barber, JR
    Hartsock, DL
    [J]. CONTACT MECHANICS, 2002, : 187 - 202
  • [2] Finite Element Method Simulations to Improve Press Formability of Door Hinge
    Toan, Nguyen Duc
    Seogou, Choi
    Junyoung, Park
    Yeongsung, Suh
    Youngsuk, Kim
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2009, 18 (08) : 1005 - 1011
  • [3] Comparison of experimental and finite element analysis results of a sheet metal prototype vehicle door hinge in X, Y and Z directions
    Ozgul, Hande Guler
    Erol, Onur
    [J]. MATERIA-RIO DE JANEIRO, 2021, 26 (03):
  • [4] Finite Element Method Simulations to Improve Press Formability of Door Hinge
    Nguyen Duc Toan
    Choi Seogou
    Park Junyoung
    Suh Yeongsung
    Kim Youngsuk
    [J]. Journal of Materials Engineering and Performance, 2009, 18 : 1005 - 1011
  • [5] Finite element analysis of the hyper-elastic contact problem in automotive door sealing
    Ordieres-Mere, J.
    Bello-Garcia, A.
    Munoz-Munilla, V.
    Del-Coz-Diaz, J. J.
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2008, 354 (47-51) : 5331 - 5333
  • [6] ANALYSIS OF PIEZOELECTRIC TRANSFORMER BY FINITE ELEMENT METHOD AND EXPERIMENTAL VERIFICATION
    Martin, Klaus T.
    Andres, Bernardo
    Bisogno, Fabio E.
    [J]. 2015 IEEE 13TH BRAZILIAN POWER ELECTRONICS CONFERENCE AND 1ST SOUTHERN POWER ELECTRONICS CONFERENCE (COBEP/SPEC), 2015,
  • [7] EXPERIMENTAL-VERIFICATION OF A FINITE-ELEMENT CONTACT ANALYSIS
    PURUSHOTHAMAN, N
    HEATON, BS
    MOORE, ID
    [J]. JOURNAL OF TESTING AND EVALUATION, 1988, 16 (06) : 497 - 507
  • [8] FINITE ELEMENT ANALYSIS OF THERMAL NANOINDENTATION PROCESS AND ITS EXPERIMENTAL VERIFICATION
    Oh, Hyun-Jun
    Lee, Eun-Kyung
    Kang, Chung-Gil
    Lee, Sang-Mae
    [J]. ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE, 2009, : 577 - +
  • [9] FINITE ELEMENT ANALYSIS AND EXPERIMENTAL VERIFICATION OF SOI WAVEGUIDE BENDING LOSS
    Srinivasan, H.
    Bommalakunta, B.
    Chamberlain, A.
    Hastings, J. T.
    [J]. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2009, 51 (03) : 699 - 702
  • [10] Finite-element analysis and experimental verification for drawbead drawing processes
    Kim, C
    Im, Y
    Heo, Y
    Kim, N
    Jun, G
    Seo, D
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 72 (02) : 188 - 194
12345