Monitoring the lubrication condition of rolling element bearings using the acoustic emission technique

被引：0

作者：

Fan, Yibo Edward ^{[1
]}

Shi, Zhanqun ^{[1
]}

Harris, Georgina ^{[1
]}

Gu, Fengshou ^{[1
]}

Ball, Andrew ^{[1
]}

机构：

[1] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M13 9PL, Lancs, England

来源：

Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 2 | 2006年

关键词：

acoustic emission (AE); rolling element bearing; grease lubrication;

D O I：

暂无

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

Lubrication condition strongly influences the behaviour and operational life of a rolling element bearing. This paper presented an experimental investigation of rolling element bearings with no lubricant and with grease-lubricant containing contaminants using the acoustic emission (AE) technique. High frequency sampling and data streaming technology were applied in the measurement of AE, instead of traditionally measured AE parameters such as the counts, events, and peak amplitude of the signal etc. By processing the AE signals with frequency domain analysis technology, the no lubricant and containing contaminants conditions can be clearly discriminated. This result proved that the frequency domain AE signal processing technique is a suitable method for monitoring the lubrication condition in rolling element bearings.

引用

页码：843 / 848

页数：6

共 50 条

[1] Application of acoustic emission to condition monitoring of rolling element bearings
Kaewkongka, T
Au, YHJ
[J]. MEASUREMENT & CONTROL, 2001, 34 (08): : 245 - 247
[2] Rolling element bearing condition monitoring using acoustic emission technique
Hemmati, F.
Orfali, W.
Gadala, M. S.
[J]. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012), 2012, : 699 - 713
[3] Lubrication Condition Monitoring and Evaluation of Rolling Bearing Based on Acoustic Emission
Duan, Jinjin
Xia, Zhou
Xu, GuangHua
Dan, Ziyan
Zhang, SiCong
Liang, Lin
[J]. 2018 IEEE INTERNATIONAL CONFERENCE ON PROGNOSTICS AND HEALTH MANAGEMENT (ICPHM), 2018,
[4] Condition monitoring of roller bearings using acoustic emission
Cornel, Daniel
Guzman, Francisco Gutierrez
Jacobs, Georg
Neumann, Stephan
[J]. WIND ENERGY SCIENCE, 2021, 6 (02) : 367 - 376
[5] Application of acoustic emission technique for the detection of defects in rolling element bearings
Choudhury, A
Tandon, N
[J]. TRIBOLOGY INTERNATIONAL, 2000, 33 (01) : 39 - 45
[6] Defect Diagnosis for Rolling Element Bearings Using Acoustic Emission
He, Yongyong
Zhang, Xinming
Friswell, Michael I.
[J]. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2009, 131 (06): : 0610121 - 06101210
[7] THE CONDITION MONITORING OF ROLLING ELEMENT BEARINGS USING VIBRATION ANALYSIS
MATHEW, J
ALFREDSON, RJ
[J]. MECHANICAL ENGINEERING, 1984, 106 (02): : 87 - 87
[8] THE CONDITION MONITORING OF ROLLING ELEMENT BEARINGS USING VIBRATION ANALYSIS
MATHEW, J
ALFREDSON, RJ
[J]. JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME, 1984, 106 (03): : 447 - 453
[9] COMPARISON OF VIBRATION AND ACOUSTIC MEASUREMENT TECHNIQUES FOR THE CONDITION MONITORING OF ROLLING ELEMENT BEARINGS
TANDON, N
NAKRA, BC
[J]. TRIBOLOGY INTERNATIONAL, 1992, 25 (03) : 205 - 212
[10] CONDITION MONITORING OF ROLLING ELEMENT BEARINGS.
Brown, P.J.
[J]. Noise Control Vibration and Insulation, 1977, 8 (02): : 41 - 44

← 1 2 3 4 5 →