Mechanical improvements to reinforced porous silk scaffolds

Load-bearing porous biodegradable scaffolds are required to engineer functional tissues such as bone. Mechanical improvements to porogen leached scaffolds prepared from silk proteins were systematically studied through the addition of silk particles in combination with silk solution concentration, exploiting interfacial compatibility between the two components. Solvent solutions of silk up to 32 w/v % were successfully prepared in hexafluoroisopropanol (HFIP) for the study. The mechanical properties of the reinforced silk scaffolds correlated to the material density and matched by a power law relationship, independent of the ratio of silk particles to matrix. These results were similar to the relationships previously shown for cancellous bone. From these data we conclude that the increased mechanical properties were due to a densification effect and not due to the inclusion of stiffer silk particles into the softer silk matrix. A continuous interface between the silk matrix and the silk particles, as well as homogeneous distribution of the silk particles within the matrix was observed. Furthermore, we note that the roughness of the pore walls was controllable by varying the ratio of the particles matrix, providing a route to control topography. The rate of proteolytic hydrolysis of the scaffolds decreased with increase in mass of silk used in the matrix and with increasing silk particle content. (C) 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 99A: 16-28, 2011.