POLY (LACTIC ACID)/ORGANOCLAY BLEND NANOCOMPOSITES: STRUCTURAL, MECHANICAL AND MICROSTRUCTURAL PROPERTIES

被引：0
|
作者：
Shameli, K. [1 ]
Zakaria, Z. [1 ]
Hara, H. [1 ]
Ahmad, M. B. [2 ]
Mohamad, S. E. [1 ]
Nordin, M. F. M. [1 ]
Iwamoto, K. [1 ]
机构：
[1] Univ Technol Malaysia, Malaysia Japan Int Inst Technol, Kuala Lumpur 54100, Malaysia
[2] Univ Putra Malaysia, Fac Sci, Dept Chem, Upm Serdang 43400, Selangor, Malaysia
来源：
DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES | 2015年 / 10卷 / 01期
关键词：
Nanocomposites; Poly (lactic acid); Montmorillonite; Octadecylamine; SILVER NANOPARTICLES; EXFOLIATION; STARCH;
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Poly (lactic acid)/clay nanocomposites were prepared by solution-casting and meltblending techniques, and their morphologies and mechanical properties were studied. Xray diffractograms revealed an intercalated-exfoliated mixed structure for the nanocomposites obtained by both techniques. TEM images show a good organoclay dispersion degree. The mechanical properties of nanocomposites from the melt-blending technique were superior to those obtained by solution-casting method. In both cases, the highest elongation at break and Young's modulus were achieved at5wt% octadecylamine-montmorillonite (ODA-MMT) content.
引用
收藏
页码：323 / 329
页数：7
相关论文
共 50 条
  • [1] Characterization and mechanical properties of poly(lactic acid)/poly(ε-caprolactone)/organoclay nanocomposites prepared by melt compounding
    Hasook, Aniwat
    Tanoue, Shuichi
    Iemoto, Yoshiyuki
    Unryu, Tsunemune
    POLYMER ENGINEERING AND SCIENCE, 2006, 46 (08): : 1001 - 1007
  • [2] Effect of organoclay chemistry and morphology on properties of poly(lactic acid) nanocomposites
    Kracalik, Milan
    PLASTICS RUBBER AND COMPOSITES, 2017, 46 (09) : 389 - 395
  • [3] Morphology and thermal properties of poly(L-lactic acid)/ organoclay nanocomposites
    Lin, Li-Huei
    Liu, Hsin-Jiant
    Yu, Neng-Kai
    Journal of Applied Polymer Science, 2007, 106 (01): : 260 - 266
  • [4] On Localization of Clay Nanoparticles in Polypropylene/poly(Lactic Acid) Blend Nanocomposites: Correlation with Mechanical Properties
    Ebadi-Dehaghani, H.
    Khonakdar, H. A.
    Barikani, M.
    Jafari, S. H.
    Wagenknecht, U.
    Heinrich, G.
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2016, 55 (04): : 344 - 360
  • [5] Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
    Di, YW
    Iannace, S
    Di Maio, E
    Nicolais, L
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2005, 43 (06) : 689 - 698
  • [6] Morphology and thermal properties of poly(L-lactic acid)/organoclay nanocomposites
    Lin, Li-Huei
    Liu, Hsin-Jiant
    Yu, Neng-Kai
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 106 (01) : 260 - 266
  • [7] Microstructure, Rheological Behavior, and Properties of Poly(lactic acid)/Poly(butylene succinate)/Organoclay Nanocomposites
    Risse, Sophie
    Tighzert, Lan
    Berzin, Francoise
    Vergnes, Bruno
    JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (12)
  • [8] In-depth study of mechanical properties of poly(lactic acid)/thermoplastic polyurethane/hydroxyapatite blend nanocomposites
    Ghassemi, Bahareh
    Estaji, Sara
    Mousavi, Seyed Rasoul
    Nemati Mahand, Saba
    Shojaei, Shahrokh
    Mostafaiyan, Mehdi
    Arjmand, Mohammad
    Khonakdar, Hossein Ali
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (14) : 7250 - 7264
  • [9] In-depth study of mechanical properties of poly(lactic acid)/thermoplastic polyurethane/hydroxyapatite blend nanocomposites
    Bahareh Ghassemi
    Sara Estaji
    Seyed Rasoul Mousavi
    Saba Nemati Mahand
    Shahrokh Shojaei
    Mehdi Mostafaiyan
    Mohammad Arjmand
    Hossein Ali Khonakdar
    Journal of Materials Science, 2022, 57 : 7250 - 7264
  • [10] Structural, Electrical, Mechanical, and Thermal Properties of Electrospun Poly(lactic acid)/Polyaniline Blend Fibers
    Picciani, Paulo H. S.
    Medeiros, Eliton S.
    Pan, Zhongli
    Wood, Delilah F.
    Orts, William J.
    Mattoso, Luiz H. C.
    Soares, Bluma G.
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2010, 295 (07) : 618 - 627
12345