Large Eddy Simulation of airflow in a test ventilated room

The goal of the study is the validation of Wall-Modeled Large Eddy Simulation (WMLES) of ventilation in an isothermal room at conditions of experiments by Nielsen et al. Two values of the inlet slot width were considered. Calculations were carried out using the ANSYS Fluent 16.2 software with an algebraic WMLES subgrid-scale model. The uniform computational meshes up to 58 million cells were used. The focus in the results discussion is on the accuracy of mean and rms velocity fields prediction both in the jet zone and the low-velocity occupied zone. It is concluded that to predict the jet spread the meshes used are sufficient. However, there is visible difference between the computed and measured data in the occupied zone especially in the essentially 3D case with narrow inlet slot.