Performance of plastic gear made of carbon fiber reinforced polyether-ether-ketone: Part 2

Five kinds of PEEK/CF composites, made by blending poly-ether-ether-ketone (PEEK) with three kinds of PAN type carbon fibers (CFs) and two kinds of pitch type CFs respectively, were injection-molded into gears. Their gear performance such as the load capability and the wear of tooth were evaluated. The wear properties of PEEK/CF gears extremely varied depending on the kinds of CFs, when the same type gears were combined and grease was initially applied. Also, the load capabilities were significantly influenced by the affinity between PEEK and CF. A composite gear reinforced with CF of the highest density indicated the highest load capability irrespective of the test conditions, due to the lowest abrasive property of the CF as well as the excellent affinity between PEEK and CF. Its load capability under a high temperature running condition was found to be superior to that of polyamideimide (PAI) composite gear or polyphenylenesulphide (PPS) composite gear. (C) 2000 Elsevier Science Ltd. All rights reserved.