Effects of Geometry on the Liquid Flow in Microchannel

被引：0
|
作者：
Liu, Z. M. [1 ]
Pang, Y. [1 ]
Shen, F. [1 ]
机构：
[1] Beijing Univ Technol, Coll Mech Engn & Appl Elect Technol, Beijing 100124, Peoples R China
来源：
RECENT PROGRESSES IN FLUID DYNAMICS RESEARCH - PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON FLUID MECHANICS | 2011年 / 1376卷
关键词：
microchannel; numerical simulation; geometry; CONVECTIVE HEAT-TRANSFER;
D O I：
暂无
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The geometric effects on the liquid flow were investigated in microchannel based on the numerical simulation method. Effects of geometry were shown obviously on the microflow by comparing the results of different geometric characteristics covering hydraulic diameter, length and aspect ratio. Thermal boundary conditions are the same for different cases in the numerical simulation. The geometric parameters except the aspect ratio have little effect on the friction factor but all of them obviously make the Nusselt number changed.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Effects of microchannel geometry on pulsed flow mixing
    Goullet, Arnaud
    Glasgow, Ian
    Aubry, Nadine
    MECHANICS RESEARCH COMMUNICATIONS, 2006, 33 (05) : 739 - 746
  • [2] Heat flux and slip effects on liquid flow in a microchannel
    Ngoma, Guyh Dituba
    Erchiqui, Fouad
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2007, 46 (11) : 1076 - 1083
  • [3] Effects of Knudsen number and geometry on gaseous flow and heat transfer in a constricted microchannel
    Hossein Shokouhmand
    Sajjad Bigham
    Rasool Nasr Isfahani
    Heat and Mass Transfer, 2011, 47 : 119 - 130
  • [4] Effects of Knudsen number and geometry on gaseous flow and heat transfer in a constricted microchannel
    Shokouhmand, Hossein
    Bigham, Sajjad
    Isfahani, Rasool Nasr
    HEAT AND MASS TRANSFER, 2011, 47 (02) : 119 - 130
  • [5] Optimized Expanding Microchannel Geometry for Flow Boiling
    Miner, Mark J.
    Phelan, Patrick E.
    Odom, Brent A.
    Ortiz, Carlos A.
    Prasher, Ravi S.
    Sherbeck, Jon A.
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2013, 135 (04):
  • [6] OPTIMIZED EXPANDING MICROCHANNEL GEOMETRY FOR FLOW BOILING
    Miner, Mark J.
    Phelan, Patrick E.
    Odom, Brent A.
    Ortiz, Carlos A.
    Sherbeck, Jonathan A.
    Prasher, Ravi S.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 10, PTS A AND B, 2012, : 835 - 841
  • [7] Stability of liquid-liquid stratified microchannel flow under the effects of boundary slip
    You, Xue-Yi
    Zheng, Jing-Ru
    International Journal of Chemical Reactor Engineering, 2009, 7
  • [8] Stability of Liquid-Liquid Stratified Microchannel Flow under the Effects of Boundary Slip
    You, Xue-Yi
    Zheng, Jing-Ru
    INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2009, 7
  • [9] Effect of inlet geometry on adiabatic gas-liquid two-phase flow in a microchannel
    Ide, Hideo
    Kimura, Ryuji
    Kawaji, Masahiro
    ICNMM2007: PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS, 2007, : 933 - 938
  • [10] Effect of inlet geometry on adiabatic gas-liquid two-phase flow in a microchannel
    Ide, Hideo
    Kimura, Ryuji
    Kawaji, Masahiro
    HEAT TRANSFER ENGINEERING, 2009, 30 (1-2) : 37 - 42
12345