Residual stress in HVOF thermally sprayed thick deposits

被引:120
|
作者
Stokes, J [1 ]
Looney, L [1 ]
机构
[1] Dublin City Univ, Mat Proc Res Ctr, Dublin 9, Ireland
来源
关键词
thermal spraying; high velocity oxy-fuel; residual stress; thick WC-Co deposit;
D O I
10.1016/j.surfcoat.2003.06.003
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
yDue to the nature of the high velocity oxy-fuel thermal spray process, residual stress build up in thick deposits is a significant and a limiting problem. The residual stress-state that evolves in a deposit is largely dependent on the thermal conditions to which the system has been subjected, and is a combination of quenching stresses, which arise during deposition, and cooling stresses, post-deposition. It follows that precise control of these phenomena is essential, if a thick deposit is to be thermally sprayed. This paper applies an analytical technique to calculate residual stress in thermally sprayed deposits based on geometric properties. Residual stress results for WC-Co (tungsten carbide-cobalt) samples are compared to experimental results (X-ray diffraction and hole-drilling method). A change in deposit stress-state from tensile to compressive stress with deposit thickness is analysed in terms of quenching and cooling stresses. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码:18 / 23
页数:6
相关论文
共 50 条
  • [1] Residual stress determination in thermally sprayed metallic deposits by neutron diffraction
    Keller, T
    Margadant, N
    Pirling, T
    Riegert-Escribano, MJ
    Wagner, W
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 373 (1-2): : 33 - 44
  • [2] Residual Stresses Distribution through Thick HVOF Sprayed Inconel 718 Coatings
    Lyphout, C.
    Nylen, P.
    Manescu, A.
    Pirling, T.
    [J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2008, 17 (5-6) : 915 - 923
  • [3] Residual Stresses Distribution through Thick HVOF Sprayed Inconel 718 Coatings
    C. Lyphout
    P. Nylén
    A. Manescu
    T. Pirling
    [J]. Journal of Thermal Spray Technology, 2008, 17 : 915 - 923
  • [4] Residual Stresses Distribution Through Thick HVOF Sprayed Inconel 718 Coatings
    C. Lyphout
    P. Nylén
    A. Manescu
    T. Pirling
    [J]. Journal of Thermal Spray Technology, 2011, 20 : 1140 - 1140
  • [5] Residual Stress in HVOF Thermally Sprayed WC-10Co-4Cr Coating in Landing Gear Application
    Gui, M.
    Eybel, R.
    Radhakrishnan, S.
    Monerie-Moulin, F.
    Raininger, R.
    Taylor, P.
    [J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, 28 (06) : 1295 - 1307
  • [6] Residual Stress in HVOF Thermally Sprayed WC-10Co-4Cr Coating in Landing Gear Application
    M. Gui
    R. Eybel
    S. Radhakrishnan
    F. Monerie-Moulin
    R. Raininger
    P. Taylor
    [J]. Journal of Thermal Spray Technology, 2019, 28 : 1295 - 1307
  • [7] Effect of particle impact on residual stress development in HVOF sprayed coatings
    P. Bansal
    P. H. Shipway
    S. B. Leen
    [J]. Journal of Thermal Spray Technology, 2006, 15 : 570 - 575
  • [8] Effect of particle impact on residual stress development in HVOF sprayed coatings
    Bansal, P.
    Shipway, P. H.
    Leen, S. B.
    [J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2006, 15 (04) : 570 - 575
  • [9] Effect of Grinding on the Residual Stress and Adhesion Strength of HVOF Thermally Sprayed WC-10Co-4Cr Coating
    Masoumi, Hamed
    Safavi, Seyed Mohsen
    Salehi, Mehdi
    Nahvi, Saied Mehran
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (09) : 1139 - 1151
  • [10] Parametric Study of Residual Stresses in HVOF Thermally Sprayed WC-12Co Coatings
    Nourouzi, S.
    Azizpour, M. Jalali
    Salimijazi, H. R.
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (09) : 1117 - 1125