Thermal stability of retained Austenite in TRIP steel after different treatments

被引：11
|
作者：
Shi Wen [1 ]
Li Lin [1 ]
De Cooman, Bruno C. [2 ]
Wollants, Patrick [3 ]
Yang Chun-Xia [1 ]
机构：
[1] Shanghai Univ, Dept Mat Sci & Engn, Shanghai 200072, Peoples R China
[2] Dept Mat Sci & Engn, Lab Iron & Steel Making, BE-9052 Ghent, Belgium
[3] Katholieke Univ Leuven, Dept MTM, B-3001 Heverlee, Belgium
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2008年 / 15卷 / 01期
基金：
中国国家自然科学基金;
关键词：
TRIP steel; retained austenite; thermal stability; differential scanning calorimetry;
D O I：
10.1016/S1006-706X(08)60013-8
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Thermal decomposition of retained austenite in TRIP steel was investigated by means of differential scanning calorimetry (DSc). The decomposition curve was abnormal, and the decomposition temperature and the activation energy were measured by the Kissinger method, which were all higher than those in quenched steel. The thermal decomposition data of samples soaked in liquid nitrogen after TRIP treatment were all similar to those without additional low temperature treatment. It indicated that there is a high thermal stability in retained austenite of the TRIP steel at low temperature, which was also proved by XRD analysis.
引用
收藏
页码：61 / 64
页数：4
相关论文
共 50 条
  • [1] Thermal Stability of Retained Austenite in TRIP Steel After Different Treatments
    Wen Shi
    Lin Li
    Bruno C. De Cooman
    Patrick Wollants
    Chun-xia Yang
    Journal of Iron and Steel Research International, 2008, 15 : 61 - 64
  • [2] Thermal Stability of Retained Austenite in TRIP Steel After Different Treatments
    Bruno C De Cooman
    Patrick Wollants
    Journal of Iron and Steel Research(International), 2008, (01) : 61 - 64
  • [3] Optimizing the Morphology and Stability of Retained Austenite in a δ-TRIP Steel
    Yi, H. L.
    Chen, P.
    Bhadeshia, H. K. D. H.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (08): : 3512 - 3518
  • [4] Optimizing the Morphology and Stability of Retained Austenite in a δ-TRIP Steel
    H. L. Yi
    P. Chen
    H. K. D. H. Bhadeshia
    Metallurgical and Materials Transactions A, 2014, 45 : 3512 - 3518
  • [5] Investigation of retained austenite and its stability in TRIP steel
    National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China
    不详
    Kang T'ieh, 2007, 8 (60-63+82):
  • [6] Thermal stability of retained austenite in TRIP-aided cold-rolled steel
    Zhang Y.
    Zhao A.
    Zhao Z.
    Tang D.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2011, 47 (04): : 66 - 70
  • [7] Microstructures and stability of retained austenite of TRIP steel containing Nb
    Zhu, Li-Ye
    Zhang, Qing-Hui
    Liang, Ya-Hong
    Chen, Leng
    Jinshu Rechuli/Heat Treatment of Metals, 2007, 32 (05): : 43 - 46
  • [8] Investigation of retained austenite and its stability in hot rolled TRIP steel
    Gao, Xu-Tao
    Zhao, Ai-Min
    Zhao, Zheng-Zhi
    Zhang, Ming-Ming
    Zhang, Yu-Guang
    Cailiao Gongcheng/Journal of Materials Engineering, 2011, (11): : 39 - 43
  • [9] Retained austenite stability investigation in TRIP steel using neutron diffraction
    Zrnik, J.
    Muransky, O.
    Lukas, P.
    Novy, Z.
    Sittner, R.
    Hornak, P.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 437 (01): : 114 - 119
  • [10] Influence of rolling of TRIP steel in the intercritical region on the stability of retained austenite
    Basuki, A
    Aernoudt, E
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 90 : 37 - 43
12345