Analysis of Replacement from Disconnecting Switch to Circuit Breaker for 500 kV Line Shunt Reactor

被引：0
|
作者：
Limtrakul, K. [1 ]
Premrudeepreechacharn, S. [1 ]
Baghzouz, Y. [2 ]
机构：
[1] Chiang Mai Univ, Fac Engn, Dept Elect Engn, Chiang Mai 50200, Thailand
[2] Univ Nevada, Dept Elect & Comp Engn, Las Vegas, NV 89154 USA
来源：
2018 18TH INTERNATIONAL CONFERENCE ON HARMONICS AND QUALITY OF POWER (ICHQP) | 2018年
关键词：
PSCAD/EMTDC; Current Chopping; Chopping Overvoltage; Re-ignition;
D O I：
暂无
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
In energize and de-energize shunt reactor, through the circuit breaker will result in overcurrent and overvoltage, which will impact on equipment and power quality in the transmission network. This paper will perform an analysis of the energize and de-energize shunt reactors. By switching shunt reactors, the three poles trip circuit breaker will cause an inductive current during interruption by the system model to simulate the transient induction during switching with the PSCAD/EMTDC program. EGAT's 500 kV transmission line is a case study for analyzing overcurrent, current chopping, chopping overvoltage and re-ignition phenomena caused by switching circuit breaker.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Analysis of an accident of 500 kV line circuit breaker mal-operation
    Yang, Tao
    Lin, Tong
    Wu, Kua-Yu
    Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control, 2010, 38 (18): : 193 - 195
  • [2] SURGES ON A REACTOR AND TRANSFORMER AT 500 KV IN SWITCHING REACTOR BY A VV-500-TYPE CIRCUIT BREAKER
    RASHKES, VS
    GALPERIN.MO
    POPOV, SM
    KOSHTALYUK, R
    IVANOVSKII, A
    KMECH, A
    ELECTRICAL TECHNOLOGY RUSSIA, 1970, 4 : 57 - +
  • [3] Overvoltage Simulation and Analysis of Switching-off Shunt Reactor with 12kV Vacuum Circuit Breaker
    Liu, Guote
    Guo, Fang
    Yuan, Kaifeng
    2020 5TH ASIA CONFERENCE ON POWER AND ELECTRICAL ENGINEERING (ACPEE 2020), 2020, : 1610 - 1614
  • [4] Analysis of the breakdown probability of the external insulation for 500 kV breaker's shunt capacitance
    Guo, Zhi-Hong
    Lu, Huai-Dong
    Wang, Bao-Li
    Yao, Jin-Xia
    Zhu, Zhen-Hua
    Gaodianya Jishu/High Voltage Engineering, 2009, 35 (10): : 2383 - 2389
  • [5] Switching overvoltage when disconnecting a combined 400 kV cable/overhead line with permanently connected shunt reactor
    Bak, Claus Leth
    Sogaard, Kim
    PROCEEDINGS OF THE 8TH WSEAS INTERNATIONAL CONFERENCE ON ELECTRIC POWER SYSTEMS, HIGH VOLTAGES, ELECTRIC MACHINES, 2008, : 99 - 108
  • [6] Modeling SF6 circuit breaker for shunt reactor switching transient analysis
    Chang, GW
    Huang, HM
    Lai, JH
    2004 INTERNATIONAL CONFERENCE ON POWER SYSTEM TECHNOLOGY - POWERCON, VOLS 1 AND 2, 2004, : 1315 - 1320
  • [7] Suppression Measures for Overvoltage Caused by Vacuum Circuit Breaker Switching Off 10-kV Shunt Reactor
    Yang, Qing
    Chen, Song
    Zeng, Xianglong
    Wei, Gang
    Liu, Hang
    Chen, Tie
    IEEE TRANSACTIONS ON POWER DELIVERY, 2020, 35 (02) : 540 - 548
  • [8] Root cause analysis for shunt reactor failure in 500 kV power system
    Arias Velasquez, Ricardo Manuel
    Mejia Lara, Jennifer Vanessa
    ENGINEERING FAILURE ANALYSIS, 2019, 104 : 1157 - 1173
  • [9] DEVELOPMENT OF A 500KV AIRBLAST HVDC CIRCUIT-BREAKER
    BACHMANN, B
    MAUTHE, G
    RUOSS, E
    LIPS, HP
    PORTER, J
    VITHAYATHIL, J
    IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, 1985, 104 (09): : 2460 - 2466
  • [10] 33kV cable connector failures due to shunt reactor switching by means of vacuum circuit breaker - A thorough investigation & mitigation analysis
    Velitsikakis, K.
    van Maanen, B. C.
    Wouters, P. A. A. F.
    La Seta, P.
    Trunk, K.
    ELECTRIC POWER SYSTEMS RESEARCH, 2023, 224
12345