Oil Palm Leaf And Corn Stalk - Mechanical Properties And Surface Characterization

被引：5

作者：

Daud, Zawawi ^{[1
]}

Hatta, Mohd. Zainuri Mohd. ^{[1
]}

Awang, Halizah ^{[2
]}

机构：

[1] Univ Tun Hussein Onn Malaysia, Fac Civil & Environm Engn, Batu Pahat 86400, Johor, Malaysia

[2] Univ Tun Hussein Onn Malaysia, Fac Tech & Vocat Educ, Batu Pahat 86400, Johor, Malaysia

来源：

WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP | 2015年

关键词：

Oil palm leaf; Corn stalk; pulp and paper; green technology; CHEMICAL-COMPOSITION;

D O I：

10.1016/j.sbspro.2015.06.226

中图分类号：

F [经济];

学科分类号：

02 ;

摘要：

Agro waste can be defined as waste from agricultural plant. Oil palm leaf and corn stalk can be categorized as ago waste material. At first, the comparison between oil palm leaf and corn stalk by mechanical properties from soda pulping process. After that, this study focusing on surface characterization by Scanning Electron Microscopy (SEM). Both materials have a potential due to the mechanical properties (tensile, tear, burst and fold) and surface characterization but corn stalk shows more in strength and compactness due to fibre characterization compared to oil palm leaf. This study promoting the green technology in developing a friendly product and suitable to be used as an alternative pulp in paper making industry. (C) 2015 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

引用

页码：2047 / 2050

页数：4

共 50 条

[1] Effect of Surface Treatment on the Physical, Chemical, and Mechanical Properties of Palm Tree Leaf Stalk Fibers
Rout, Arun Kumar
Kar, Jnanaranjan
Jesthi, Dipak Kumar
Sutar, Alekh Kumar
BIORESOURCES, 2016, 11 (02): : 4432 - 4445
[2] Effect of surface treatment on the physical, chemical, and mechanical properties of palm tree leaf stalk fibers
Rout A.K.
Kar J.
Jesthi D.K.
Sutar A.K.
Rout, Arun Kumar (arun.rout.6314@gmail.com), 1600, North Carolina State University (11): : 4432 - 4445
[3] Physical, Mechanical, and Erosion Characterization of Palm Leaf Stalk Fiber Reinforced Epoxy Composites Filled with Palm Leaf Stem Stalk (PLSS) Powder
Kar, Jnanaranjan
Rout, Arun Kumar
Sutar, Alekha Kumar
BIORESOURCES, 2018, 13 (04): : 7212 - 7231
[4] Experimental characterization of surface modified Palmyra Palm Leaf Stalk Fiber (PPLSF) /polymer composites- Mechanical, Crystallinity and Acoustic properties
Shanmugam, D.
Thirumurugan, Rama
Thiruchitrambalam, M.
Maheshkumar, B.
JOURNAL OF NATURAL FIBERS, 2022, 19 (14) : 7778 - 7796
[5] Research on Mechanical Properties of Corn Stalk
Zhang, Kaifei
He, Yujing
Zhang, Hongmei
Li, He
ADVANCES IN MATERIALS, MACHINERY, ELECTRONICS I, 2017, 1820
[6] A comprehensive characterization of corn stalk and study of carbonized corn stalk in dye and gas oil sorption
Husseien, M.
Amer, A.A.
El-Maghraby, Azza
Hamedallah, Neama
Journal of Analytical and Applied Pyrolysis, 2009, 86 (02): : 360 - 363
[7] A comprehensive characterization of corn stalk and study of carbonized corn stalk in dye and gas oil sorption
Husseien, M.
Amer, A. A.
El-Maghraby, Azza
Hamedallah, Neama
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2009, 86 (02) : 360 - 363
[8] PHYSICAL AND MECHANICAL PROPERTIES OF PARTICLEBOARDS PRODUCED FROM COTTON STALK AND CORN STALK
Kup, Ferhat
Vural, Ceyhun
FRESENIUS ENVIRONMENTAL BULLETIN, 2021, 30 (02): : 853 - 859
[9] Investigation of Physicochemical Properties and Characterization of Leaf Stalk Fibres Extracted from the Caribbean Royal Palm Tree
Gurupranes, S. V.
Natrayan, L.
Kaliappan, S.
Patel, Praveen Bhai
Sekar, S.
Jayaraman, P.
Arvinda Pandian, C. K.
Esakkiraj, E. S.
INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING, 2022, 2022
[10] Influence of pre-treatments on the mechanical properties of palmyra palm leaf stalk fiber-polyester composites
Thiruchitrambalam, M.
Shanmugam, D.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2012, 31 (20) : 1400 - 1414

← 1 2 3 4 5 →