THE STRUCTURE AND MECHANICAL PROPERTIES OF THE Zn-1.6Mg ALLOY PREPARED BY RAPID SOLIDIFICATION

被引：0

作者：

Pospisilova, Iva ^{[1
]}

Machova, Marketa ^{[1
]}

Vojtech, Dalibor ^{[1
]}

机构：

[1] Univ Chem & Technol, Dept Met & Corros Engn, Prague, Czech Republic

来源：

METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2015年

关键词：

Biodegradable material; zinc; magnesium;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this work, a Zn-1.6Mg alloy was studied. The alloy composition was chosen according to the results of our previous work, which was focused on the research of biodegradable materials. The mechanical properties of such cast alloy are similar to the characteristics of human bones. Moreover, the Zn-1.6Mg alloy satisfies the requirements of biocompatibility. These facts determine the alloy for use in medicine as a suitable material for temporary implants. The alloy was studied in three different stages of processing: a cast form, an extruded form and, finally, a rapidly solidified alloy prepared by melt-spinning with the following hot extrusion. The main aim was to prepare a Zn-1.6Mg alloy with fine structure which ensures the improvement of mechanical properties. Microstructure was evaluated by optical and electron microscopy; mechanical properties (compressive strength, hardness) were measured and corrosion rate was evaluated in model physiological solution.

引用

页码：1277 / 1282

页数：6

共 50 条

[1] Testing of Zn-1.6Mg alloy in model physiological solution
Pospisilova, Iva
Msallamová, Šárka
Vojtech, Dalibor
Manufacturing Technology, 2015, 15 (06): : 1032 - 1036
[2] Optimization of mechanical properties of dilute Mg-Zn-Y alloys prepared by rapid solidification
Drozdenko, Daria
Yamasaki, Michiaki
Mathis, Kristian
Dobron, Patrik
Lukac, Pavel
Kizu, Naoya
Inoue, Shin-ichi
Kawamura, Yoshihito
MATERIALS & DESIGN, 2019, 181
[3] Influence of rapid solidification on the mechanical properties of Mg-Zn-Ce-Ag magnesium alloy
Cai, J.
Ma, G. C.
Liu, Z.
Zhang, H. F.
Wang, A. M.
Hu, Z. Q.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 456 (1-2): : 364 - 367
[4] Improving mechanical properties and corrosion resistance of Mg-6Zn-Mn magnesium alloy by rapid solidification
Zhang, H. J.
Zhang, D. F.
Ma, C. H.
Guo, S. F.
MATERIALS LETTERS, 2013, 92 : 45 - 48
[5] Evolution of Mg-Zn second phases during ECAP at different processing temperatures and its impact on mechanical properties of Zn-1.6Mg (wt.%) alloys
Liu, Huan
Huang, He
Zhang, Yue
Xu, Yan
Wang, Ce
Sun, Jiapeng
Jiang, Jinghua
Ma, Aibin
Xue, Feng
Bai, Jing
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 811
[6] Investigation of Microstructures and Mechanical Properties of Ultra-High Strength Al-Zn-Mg-Cu Alloy Prepared by Rapid Solidification and Hot Extrusion
Shen, Gaoliang
Xiang, Zhilei
Ma, Xiaozhao
Huang, Jingcun
Zhao, Yueqing
Li, Jihao
Wang, Zhitian
Shi, Guodong
Chen, Ziyong
METALS, 2023, 13 (02)
[7] Effect of Heat Treatment on the Mechanical Properties of Wrought Al-Zn-Mg-Cu Alloy Cast by Rapid Solidification
Kapinos, Dawid
Szymanek, Marcin
Augustyn, Boguslaw
Gawlik, Maciej
LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 496 - 500
[8] Compressive mechanical properties of NiAl/Cr(Nb) alloy prepared by rapid solidification processing
Du, Xing Hao
Huang, J. C.
Wu, Bao Liu
ADVANCED ENGINEERING MATERIALS, 2007, 9 (08) : 684 - 688
[9] Improving mechanical properties of a cast Al-Mg alloy with high Mg content by rapid solidification
Wang, Xinbiao
Lin, Yaojun
Liu, Zhibo
Liu, Shengfa
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 852
[10] Effect of rapid solidification on the structure and mechanical properties of AZ91 magnesium alloy
Tokarski, Tomasz
ELECTRON MICROSCOPY XIV, 2012, 186 : 120 - 123

← 1 2 3 4 5 →