Modal analysis based on finite element method and experimental validation on carbon fibre composite drive shaft considering steel joints

被引：10
|
作者：
Ding, G. [1 ]
Xie, C. [1 ]
Zhang, J. [1 ]
Zhang, G. [1 ]
Song, C. [1 ]
Zhou, Z. [1 ]
机构：
[1] Wuhan Univ Technol, Sch Mech & Elect Engn, Wuhan 430070, Peoples R China
来源：
MATERIALS RESEARCH INNOVATIONS | 2015年 / 19卷
关键词：
Composite material; Finite element method; Carbon fibre composite drive shaft; Modal analysis; Natural frequency; HYBRID; STRENGTH; DESIGN;
D O I：
10.1179/1432891714Z.0000000001187
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The finite element method was used to analysis the natural frequencies of the carbon fibrere-inforced plastic tube and carbon fibre reinforced plastic shaft with steel joints, respectively, which showed that there was a remarkable difference between the two results. The difference indicated that the steel joints had influence on carbon fibre reinforced plastic shaft's modes and natural frequencies, and they should be considered in the carbon fibre reinforced plastic shaft dynamic properties. A modal test system was constructed to perform the carbon fibre reinforced plastic shaft specimen's natural frequency measurement through impact technique. The measured natural frequencies and the finite element method calculated measured natural frequencies showed a basic consistency.
引用
收藏
页码：748 / 753
页数：6
相关论文
共 50 条
  • [1] Static property analyses based on finite element method and torsion tests on carbon fibre composite motor drive shaft
    Zhang, G.
    Zhou, Z.
    Ding, G.
    Xie, C.
    Zhang, J.
    Hu, Y.
    MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 713 - 717
  • [2] Modal analysis of carbon fiber reinforced polyamide66 drive shaft using analytical and finite element approach
    Raushan, Rakesh
    Dhande, K. K.
    Jamadar, N. I.
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, : 2801 - 2816
  • [3] Finite element analysis of carbon fibre composite adaptive mirrors
    Kendrew, S
    Doel, P
    ADVANCEMENTS IN ADAPTIVE OPTICS, PTS 1-3, 2004, 5490 : 1591 - 1599
  • [4] Modal Analysis of Ball Screw Drive System by Finite Element Method
    Zhang Yawei
    Zhang Weimin
    FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO II, 2011, 464 : 285 - 288
  • [5] Experimental and Analytical Modal Analysis of Carbon Fibre Reinforced Composite Structures
    Zehn, M. W.
    Marinkovic, D.
    v. Loewis, P.
    PROCEEDINGS OF ISMA 2008: INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING, VOLS. 1-8, 2008, : 3399 - 3405
  • [6] Weight optimization and Finite Element Analysis of Composite automotive drive shaft for Maximum Stiffness
    Reddy, P. Satheesh Kumar
    Nagaraju, Ch.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 2390 - 2396
  • [7] Fuzzy finite element method: An experimental modal analysis comparison
    Tison, T.
    Ruffin, K.
    Massa, F.
    Lallemand, B.
    Proceedings of ISMA2006: International Conference on Noise and Vibration Engineering, Vols 1-8, 2006, : 4219 - 4225
  • [8] Modal analysis and application based on finite element method
    Wu Shuqian
    Wu Guoqing
    Zhou Jingling
    Zhu Weinan
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING II, PTS 1 AND 2, 2014, 457-458 : 1601 - 1604
  • [9] Determination of Bending Stiffness in Bolted Joints by the Finite Element Method and Experimental Validation
    Abad-Blasco, J.
    Franco-Gimeno, J. M.
    Gonzalez-Martinez, M. P.
    Lezaun-Martinez, L.
    Zapico-Valle, J. L.
    PROCEEDINGS OF THE TENTH INTERNATIONAL CONFERENCE ON COMPUTATIONAL STRUCTURES TECHNOLOGY, 2010, 93
  • [10] Modal Analysis of a Multi-cracked FG Shaft Using Finite Element Method
    Gaur, Piyush
    Pamnani, Gulab
    2022 7TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, ICMERR, 2022, : 150 - 156
12345