Grain size dependence of annealing strengthening of an extruded Mg-Gd-Zn alloy subjected to pre-compression deformation

In this work, pre-strain annealing strengthening (PSAS) effect was investigated in an extruded Mg-1.0Gd-1.5 Zn (wt.%) alloy with respect to different grain sizes. The evolution of microstructures was provided by scanning electron microscopy (SEM), electron backscattered diffraction (EBSD), transmission electron microscopy (TEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) under the initial state, pre-compression, intermediate annealing and re-compression conditions. The obtained results showed a grain size-dependent PSAS effect in the alloy. The sample with larger grain sizes corresponded to a higher strengthening effect, which mainly resulted from a more remarkable hindrance for the growth of existing twins and a larger proportion of activation for the nucleation of new twins. This was closely associated with the increase of back stress and friction stress for twin boundary motion impeded by the larger restraint of dislocations, the higher stress field surrounding solutes and the more Zn segregation. In addition to twinning behavior, Guinier Preston (G.P.) zones on basal < a > dislocations were found after intermediate annealing and provided an extra strengthening by inhibiting the motions of gilding pre-existing dislocations and newly formed ones, but it was independent on the grain size. (c) 2021 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer review under responsibility of Chongqing University