Silicon rapid thermal processing with ripple pyrometry

Thermal processing in silicon integrated circuit fabrication steps for dopant activation, metal silicides, annealing, and oxidation commonly uses single-wafer furnaces that rapidly heat wafers with incandescent infrared lamps. Radiation pyrometers and thermocouple probes are the principle methods of measuring wafer temperature for closed-loop control of rapid thermal processes. The challenge with thermocouples is in dealing with heat from the lamps and non-ideal thermally resistive wafer contact. The challenge with pyrometry is in compensating for the variable emissivity of wafer surfaces and suppressing interference from the lamps. Typical deposited or grown layers of silicon nitride, silicon dioxide, and polycrystalline silicon can produce dramatic changes in emissivity. Layer thicknesses and composition are generally not known with sufficient accuracy, so a method for real time in situ emissivity compensation is required. Accufiber introduced a "ripple technique" to address this issue. The idea is to use two probes, separately sensing radiation from the wafer and the lamps, and extracting AC and quasi-DC parts from each. The AC signals provide a measure of the reflectivity of the wafer, and thence emissivity, as well as the fraction of reflected lamp radiation present in the DC signals. Lucent Technologies introduced a method of using AC lamp ripple to measure wafer temperatures with two radiation probes at a wall in the furnace. One probe views radiation emanating from the wafer through a gap in the lamp array. The other probe has a wide field of view to include lamp radiation. The accuracy of Lucent devices, determined from process results on wafers with various emissivities, is typically in the range of 12 degrees C to 18 degrees C at three standard deviations.