Deep hole drilling

被引：87

作者：

Biermann, D. ^{[1
]}

Bleicher, E. ^{[2
]}

Heisel, U. ^{[3
]}

Klocke, F. ^{[4
]}

Moehring, H-C ^{[3
]}

Shih, A. ^{[5
]}

机构：

[1] Tech Univ Dortmund, Dortmund, Germany

[2] Tech Univ Wien, Vienna, Austria

[3] Univ Stuttgart, Stuttgart, Germany

[4] Rheinisch Westfal Tech Hsch Aachen, Aachen, Germany

[5] Univ Michigan, Ann Arbor, MI 48109 USA

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2018年 / 67卷 / 02期

基金：

美国国家科学基金会;

关键词：

Deep hole drilling; Machining; Surface; COMPLEX FORCE SYSTEMS; SOLID-BORING TOOL; GUIDE PADS; CHIP FORMATION; DESIGN; WORKPIECE; VIBRATION; GEOMETRY; BEHAVIOR; WEAR;

D O I：

10.1016/j.cirp.2018.05.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Deep hole drilling processes, which differ significantly from conventional drilling processes, are relevant for a lot of different applications where holes with high length-to-diameter-ratios and very good qualities are necessary. This paper gives an overview of different methods, which are established to produce bore holes with demanding aspects related to diameter, length-to-diameter-ratio, bore hole quality, workpiece materials and complex internal contours. Beside the detailed explanation of the deep hole drilling methods and tools also the fundamentals of the deep hole drilling principle are explained and completely new developed figures and tables summarize the state of the art. In addition for the most important areas the latest results of process and tool development are included. (C) 2018 Published by Elsevier Ltd on behalf of CIRP.

引用

页码：673 / 694

页数：22

共 50 条

[1] Deep hole drilling
Klein, M
[J]. ZEITSCHRIFT DES VEREINES DEUTSCHER INGENIEURE, 1936, 80 : 311 - 316
[2] Hole quality in deep hole drilling
Hayajneh, NT
[J]. MATERIALS AND MANUFACTURING PROCESSES, 2001, 16 (02) : 147 - 164
[3] The Hole Story: A Deep Dive on Drilling
Lorincz, Jim
[J]. MANUFACTURING ENGINEERING, 2023, 170 (02): : 64 - 68
[4] DRILLING CONTRACTORS - STUCK IN A DEEP HOLE
CARTER, RA
[J]. E&MJ-ENGINEERING AND MINING JOURNAL, 1992, 193 (05): : 33 - 35
[5] Bifurcations of Deep Hole Drilling Process
Bykador, V. S.
Bykador , Zh. E.
[J]. INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE 2017), 2017, 206 : 151 - 156
[6] ANSYS is Used on Drilling Inner Blind Hole on Deep Hole
Tianqi Wang
Xin Liu
Zhanfeng Liu
Yanshu Liu
Yukun Zhang
Zhe Wang
[J]. Wireless Personal Communications, 2018, 103 : 1077 - 1088
[7] ANSYS is Used on Drilling Inner Blind Hole on Deep Hole
Wang, Tianqi
Liu, Xin
Liu, Zhanfeng
Liu, Yanshu
Zhang, Yukun
Wang, Zhe
[J]. WIRELESS PERSONAL COMMUNICATIONS, 2018, 103 (01) : 1077 - 1088
[8] INVESTIGATION OF FORCES IN DEEP HOLE BONE DRILLING
Lee, JuEun
Chu, Serena
Chavez, Craig L.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 3, 2019,
[9] Tool stability analysis for deep hole drilling
Gorbatyuk, Sergey
Kondratenko, Valery
Sedykh, Larisa
[J]. INTERNATIONAL CONFERENCE ON MODERN TRENDS IN MANUFACTURING TECHNOLOGIES AND EQUIPMENT (ICMTMTE 2018), 2018, 224
[10] Influence of cutting oil in deep hole drilling
Mueller, Stefan
[J]. PRAZISIONS- UND TIEFBOHREN AKTUELL: TECHNIK - TOOLS - TRENDS, 2008, 2054 : 159 - 169

← 1 2 3 4 5 →