The short and long term properties of a liquid crystalline polymer at elevated temperatures: Characterization and modeling

被引:0
|
作者
DiFilippo, V [1 ]
Saigal, A [1 ]
Zimmerman, MA [1 ]
机构
[1] Tufts Univ, Dept Mech Engn, Medford, MA 02155 USA
关键词
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Tensile and short term (24 h) creep tests were performed on Xydar G930, a liquid crystalline polymer (LCP) with 30 wt.% glass filler, at temperatures and stress levels ranging from room temperature to 175 degrees C and 0.3 fraction UTS to 0.8 fraction UTS, respectively. Temperature was found to have an affect on the short term tensile properties. The resulting strain versus time creep curves showed the expected dependence of creep strain on temperature and stress level. Creep compliance curves were derived from the creep curves and showed distinctively nonlinear viscoelastic behavior at all stress levels and temperatures. Creep compliance was found to follow a power law in time, The power law was used to model the stress dependence of creep and the Arrhenius equation was employed to model the temperature dependence up to 120 degrees C, A significant reduction in creep resistance was observed at 175 degrees C. Time-temperature-stress-superposition was used to show that the material followed power law behavior up to 1000 h.
引用
收藏
页码:161 / 170
页数:10
相关论文
共 50 条
  • [1] The short and long term properties of a liquid crystalline polymer at elevated temperatures: Characterization and modeling
    Saigal, A
    Difilippo, V
    Zimmerman, MA
    JOURNAL OF ELECTRONIC MATERIALS, 1997, 26 (07) : 847 - 851
  • [2] The short and long term properties of a liquid crystalline polymer at elevated temperatures: Characterization and modeling
    A. Saigal
    V. Difilippo
    M. A. Zimmerman
    Journal of Electronic Materials, 1997, 26 : 847 - 851
  • [3] Short- and long-term mechanical properties of filled and unfilled thermotropic liquid crystalline polymer injection moldings
    Plummer, C.J.G.
    Wu, Y.
    Davies, P.
    Zulle, B.
    Demarmels, A.
    Kausch, H.-H.
    Journal of Applied Polymer Science, 1993, 48 (04): : 731 - 740
  • [4] THE SHORT-TERM AND LONG-TERM MECHANICAL-PROPERTIES OF FILLED AND UNFILLED THERMOTROPIC LIQUID-CRYSTALLINE POLYMER INJECTION MOLDINGS
    PLUMMER, CJG
    WU, Y
    DAVIES, P
    ZULLE, B
    DEMARMELS, A
    KAUSCH, HH
    JOURNAL OF APPLIED POLYMER SCIENCE, 1993, 48 (04) : 731 - 740
  • [5] Synthesis, characterization and properties of a reactive thermotropic liquid crystalline polymer
    Wei Chun
    Lu Weizhong
    Gong Yongyang
    PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS, VOLS 1 AND 2, 2009, : 521 - 524
  • [6] Short-Term and Long-Term Performance of Thermosets Exposed to Water at Elevated Temperatures
    Romhild, S.
    Bergman, G.
    Hedenqvist, M. S.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 116 (02) : 1057 - 1067
  • [7] Microstructural characterization and mechanical properties of lightweight polymer concrete exposed to elevated temperatures
    Ataabadi, Hossein Sanaei
    Sedaghatdoost, Arash
    Rahmani, Hamid
    Zare, Abdolreza
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 311
  • [8] Synergistic friction and wear of ternary blends of polyetheretherketone, polyetherimide and a thermotropic liquid crystalline polymer at elevated temperatures
    Hanchi, J
    Eiss, NS
    TRIBOLOGY TRANSACTIONS, 1997, 40 (01): : 102 - 110
  • [9] Synergistic friction and wear of ternary blends of polyetheretherketone, polyetherimide and a thermotropic liquid crystalline polymer at elevated temperatures
    Hanchi, J
    Eiss, NS
    ASME/STLE TRIBOLOGY CONFERENCE, 1996, 1996, : 173 - 181
  • [10] Fatigue damage characterization and modeling of a triaxially braided polymer matrix composite at elevated temperatures
    Montesano, John
    Fawaz, Zouheir
    Behdinan, Kamran
    Poon, Cheung
    COMPOSITE STRUCTURES, 2013, 101 : 129 - 137