Phosphorus Determination after Mehlich 3 Extraction and Anion Exchange Resin in an Agricultural Soil of Northwestern Spain

Differences in soil phosphorus (P) contents measured by various techniques may have implications for agronomic and environmental testing. Reduced-tillage systems combined with surface manure application increase the potential risk of nutrient losses by surface runoff. A field trial was conducted to evaluate the effect of livestock slurry on nutrient accumulation at the surface layer of an acidic soil rich in organic matter with excess P levels and loamy texture. Two reduced-tillage systems, no tillage (NT) and minimum tillage (MT), and four different fertilizer treatments were assessed. The amounts of P extracted by anion-exchange resin (AER) and by Mehlich 3 (M3) were compared; in addition, differences between two determination methods of P contents extracted by Mehlich 3, namely molybdic acid colorimetric standard procedure (M3-COL) and inductively coupled plasma-mass spectroscopy (M3-ICP), were evaluated. Ninety-six soil samples were taken from the 0- to 5-cm surface layer in three successive dates after increasing manure addition. Colorimetric Mehlich 3 P ranged from 49 to 431 mg dm(-3). The ranks of mean extractable soil P concentrations were AER < M3-COL < M3-ICP. The linear correlation coefficient between M3-COL and M3-ICP was highly significant (R-2 = 0.89; P < 0.01), but a two-straight-lines model or a quadratic relationship were more adequate for describing the dependence between the two determination procedures after M3 extraction. Relative and absolute differences between M3-COL and M3-ICP showed a tendency to increase as organic carbon content increased. Phosphorus content extracted by AER and M3-COL or M3-ICP reported a significant but much less predictable relationship with R-2 values of 0.27 and 0.21 (n = 96), respectively. The P in the surface layer accumulated more under NT than under MT.