Evaluation tool condition of milling wood on the basis of vibration signal

被引：10
|
作者：
Szwajka, K. [1 ]
Gorski, J. [1 ]
机构：
[1] Univ Rzeszow, Inst Technol, PL-35959 Rzeszow, Poland
来源：
4TH INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY (ISIST' 2006) | 2006年 / 48卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
D O I：
10.1088/1742-6596/48/1/225
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
The paper presents preliminary results of the research of tool condition monitoring based on both original and demodulated signals measurements of an vibration generated by a cutting process in milling. The experiments have been performed on the milling center (CNC). Because the dynamic characteristics of tool vibration in machining process will change with tool wear development, which is one of the important dynamic characteristics of tool vibration. The signals were analyzed through FFT analyzer and computer (realised in the environment of NI LabVIEW). Work supported by the Grant 3 P06L 025 24 from Committee of Scientific Research of Poland.
引用
收藏
页码：1205 / 1209
页数：5
相关论文
共 50 条
  • [1] Vibration singularity analysis for milling tool condition monitoring
    Zhou, Chang'an
    Yang, Bin
    Guo, Kai
    Liu, Jiangwei
    Sun, Jie
    Song, Ge
    Zhu, Shaowei
    Sun, Chao
    Jiang, Zhenxi
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 166
  • [2] Tool condition monitoring in milling using vibration analysis
    Yesilyurt, I.
    Ozturk, H.
    [J]. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2007, 45 (04) : 1013 - 1028
  • [3] An integrated wireless vibration sensing tool holder for milling tool condition monitoring
    Xie, Zhengyou
    Li, Jianguang
    Lu, Yong
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (5-8): : 2885 - 2896
  • [4] An integrated wireless vibration sensing tool holder for milling tool condition monitoring
    Zhengyou Xie
    Jianguang Li
    Yong Lu
    [J]. The International Journal of Advanced Manufacturing Technology, 2018, 95 : 2885 - 2896
  • [5] Face milling tool condition monitoring using sound signal
    Madhusudana C.K.
    Kumar H.
    Narendranath S.
    [J]. International Journal of System Assurance Engineering and Management, 2017, 8 (Suppl 2) : 1643 - 1653
  • [6] Condition monitoring of face milling tool using K-star algorithm and histogram features of vibration signal
    Madhusudana, C. K.
    Kumar, Hemantha
    Narendranath, S.
    [J]. ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2016, 19 (03): : 1543 - 1551
  • [7] Milling Tool Condition Monitoring Based on an Integrated Wireless Vibration Sensing Tool Holder
    Sun, X.
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024,
  • [8] Fractal analysis of vibration signals for monitoring the condition of milling tool wear
    Xu Chuangwen
    Hualing, C.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J6) : 909 - 918
  • [9] Singularity Analysis of Cutting Force and Vibration for Tool Condition Monitoring in Milling
    Zhou, Chang'an
    Guo, Kai
    Yang, Bin
    Wang, Haijin
    Sun, Jie
    Lu, Laixiao
    [J]. IEEE ACCESS, 2019, 7 : 134113 - 134124
  • [10] Tool condition monitoring of PCB milling machine based on vibration analysis
    Gomathi, K.
    Balaji, A.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 3386 - 3397
12345