The removal of heavy metals in a packed bed column using immobilized cassava peel waste biomass

Several studies on the removal of heavy metals in batch systems using cassava waste biomass have been reported in literature. However, for practical and large scale operations, packed bed columns are preferred. This study investigated the biosorption of heavy metals (Cr3+, Co2+ and V3+) onto immobilized cassava peel waste in a packed bed column. Experiments were conducted with 100 mg/L of combined metal ion solutions under different flow rates (0.83-1.61 mL/s) and bed depths (5-15 cm). The dynamic behaviour of the process was described in terms of the breakthrough curves. The results showed that the removal efficiency was favoured by low flow rate and high bed depth. Biosorption efficiency was found to increase in the order V3+ > Cr3+ > Co2+ for all conditions tested. Amongst the two well-established column models tested, the bed depth service time (BDST) model with biosorption capacities of 99.6, 116.2 and 132.8 mg/L for Co2+, Cr3+ and V3+, respectively, fitted experimental data very well. The column was regenerated and reused six times consecutively without significant loss in biosorbent capacity signifying its appropriateness for commercial application. (C) 2014 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.