Kinetics of ion release from a conventional glass-ionomer cement

Release kinetics for sodium, silicon, aluminium, calcium and phosphorus from conventional glass-ionomer dental cement has been studied in neutral and acid conditions. Specimens (6 mm height x 4 mm diameter) were made from AquaCem (Dentsply, Konstanz, Germany), 6 per experiment. They were matured (37 degrees C, 1 h), then placed in 5 cm(3) storage solution at 20-22 degrees C. In the first experiment, deionised water, changed daily for 28 days, was used. In the second, deionised water, changed monthly for 21 months, was used. In the third, lactic acid (20 mmol dm(-3), pH: 2.7 +/- 0.1), changed monthly for 21 months was used. After storage each solution was analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Results showed that in neutral conditions, no calcium was released, but in acid, significant amounts were released. The other elements (Na, Al, Si and P) were released in neutral as well as acid conditions, with greater amounts in acid. More frequent changes of water gave greater release. In neutral conditions, release over 21 months followed the equation: [E](c) = [E](1)t/(t(1/2)) + beta root t ([E](c) is the cumulative release of the element). In acid conditions, this became: [E](c) = [E](1)t/(t + t(1/2)) + at. Hence release of all elements was shown to occur in two steps, a rapid initial one (half-life: 12-18 h) and a longer second one. In neutral conditions, the longer step involves diffusion; in acid it involves erosion. These patterns influence the material's bioactivity. [GRAPHICS] .