Study of magnetization relaxation in Co thin films prepared by substrate rotation

Magnetization relaxation and surface morphology have been studied for Co thin films prepared by sputtering with oblique deposition and by varying the substrate rotation (omega) at 0, 10 and 20 rpm. The films prepared with to omega = 10 and 20 rpm during deposition exhibit high dispersion of local grain anisotropy. The average grain size for the samples prepared with to omega = 10, 20 rpm is smaller than that of the sample prepared with omega = 0 rpm. Uniform distribution of grains is observed for the sample prepared with to omega = 10 rpm. However, the sample prepared with to omega = 20 rpm revealed the formation of non -uniformly distributed island like structures due to the lack of sufficient time for the adatoms to relax. Magnetization relaxation for all the samples was performed using magneto -optic Kerr effect (MOKE) based microscopy in the longitudinal mode. Sample prepared with to omega = 0 rpm exhibits slow relaxation due to nucleation followed by fast domain wall motion. On the contrary, for the sample prepared with omega = 10 rpm, uniform grains and high exchange interaction leads to fast relaxation. However, the relaxation is slow in the sample prepared with to omega = 20 rpm due to decrease in exchange energy arising from non uniformity of grains. (C) 2016 Elsevier B.V. All rights reserved.