FATIGUE CRACK DETECTION USING DIGITAL IMAGE CORRELATION

At present, detecting structural defects such as cracking and corrosion before they become critical is largely achieved by time consuming techniques such as eddy current and ultrasonic testing. These techniques require point-by-point scanning over the area to be tested. Digital Image Correlation could provide a cheaper and quicker testing technique. It works by correlating images of the structure surface in unloaded and loaded states taken with a standard digital camera, giving the displacement and strain fields. The specific case of a crack at a hole in an aluminium plate was investigated. It was found that the strain concentration around the crack tip is too localised to detect; however the displacement jump across the crack could be seen. This technique allows the cracks to be detected and would allow rapid testing of a structure if it can easily be loaded.