Study on Surface Roughness in Ultrasonic High-speed Milling of SiCp/Al Composites

被引：1
|
作者：
Xiang, Daohui [1 ]
Yue, Guangxi [1 ]
Liu, Haitao [1 ]
Zhao, Bo [1 ]
机构：
[1] Henan Polytech Univ, Sch Mech & Power Engn, Jiaozuo 454000, Peoples R China
来源：
HIGH SPEED MACHINING V | 2012年 / 723卷
关键词：
SiCp/Al MMCs; ultrasonic high-speed milling; PCD tool; MATRIX COMPOSITES; VIBRATION;
D O I：
10.4028/www.scientific.net/MSF.723.214
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The orthogonal analysis and single factor analysis were used to analyze the roughness of SiCp/Al metal matrix composites (SiCp/Al MMCs) with ultrasonic high-speed milling and high-speed milling. The influences of milling speed, feed and milling depth on the roughness were studied. The research indicates that the roughness in ultrasonic high-speed milling is lower than that in high-speed milling under the same condition, at the same time the optimal parameters of ultrasonic high-speed milling are obtained, this has a guiding significance for finish machining of SiCp/Al composites.
引用
收藏
页码：214 / 218
页数：5
相关论文
共 50 条
  • [1] Study on Surface Quality of Al/SiCp Composites with Ultrasonic Vibration High Speed Milling
    Xiang, Daohui
    Zhi, Xintao
    Yue, Guangxi
    Gao, Guofu
    Zhao, Bo
    [J]. HISTORY OF MECHANICAL TECHNOLOGY AND MECHANICAL DESIGN, 2011, 42 : 363 - 366
  • [2] Experimental Study on High-speed Milling of SiCp/Al Composites
    Ge, Yingfei
    Xu, Jiuhua
    Fu, Yucan
    [J]. MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 725 - +
  • [3] The Study on Three-Dimensional Roughness of Machined Surface in High Speed Milling of SiCp/Al Composites
    Wang, Y. J.
    Zhou, M.
    Zhao, Y. H.
    [J]. HIGH SPEED MACHINING, 2011, 188 : 179 - 183
  • [4] Experimental study of high-speed milling of SiCp/Al composites with PCD tools
    Huang, S. T.
    Zhou, L.
    Yu, X. L.
    Cui, Y.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 62 (5-8): : 487 - 493
  • [5] Experimental study of high-speed milling of SiCp/Al composites with PCD tools
    S. T. Huang
    L. Zhou
    X. L. Yu
    Y. Cui
    [J]. The International Journal of Advanced Manufacturing Technology, 2012, 62 : 487 - 493
  • [6] Cutting Forces when High-speed Milling of SiCp/Al Composites
    Ge, Yingfei
    Xu, Jiuhua
    Fu, Yucan
    [J]. ADVANCED DESIGN TECHNOLOGY, PTS 1-3, 2011, 308-310 : 871 - +
  • [7] Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites
    Cui, Youzheng
    Gao, Shenrou
    Wang, Fengjuan
    Hu, Qingming
    Xu, Cheng
    Xu, Fengxia
    [J]. MATERIALS, 2021, 14 (15)
  • [8] Prediction of milling forces in high-speed milling optical grade SiCp/Al composites
    Guo, Lin
    Huang, Shu-Tao
    Yang, Hai-Cheng
    Xu, Li-Fu
    Zhang, Yu-Pu
    [J]. Guangxue Jingmi Gongcheng/Optics and Precision Engineering, 2021, 29 (01): : 117 - 129
  • [9] Cutting Temperature Investigation when High-speed Milling of SiCp/Al Composites
    Ge, Y. F.
    Xu, J. H.
    Fu, Y. C.
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 198 - +
  • [10] Study on Tool Wear of High Volume Fraction SiCp/Al Composites with Ultrasonic Vibration High Speed Milling
    Xiang, Daohui
    Liu, Haitao
    Jiang, Xiao
    Liang, Song
    Yang, Guangbin
    [J]. ADVANCED RESEARCH ON APPLIED MECHANICS AND MANUFACTURING SYSTEM, 2013, 252 : 198 - 201
12345