PRODUCTION OF NANOCELLULOSE FROM NATIVE CELLULOSE - VARIOUS OPTIONS UTILIZING ULTRASOUND

In this study three different ways of applying ultrasound for the production of nanocellulose from native cellulose were explored. In the first option bleached hardwood kraft pulp was oxidized with the ultrasound (US) assisted TEMPO/NaBr/NaOCl-system (US-TEMPO-system) followed by mechanical separation of nanocellulose. The pulp oxidized by the US-TEMPO-system had higher carboxyls content and ca. 10% increase in nanocellulose yield when compared to the TEMPO-system without sono catalysis. In the second option ultrasound pretreated pulp was oxidized using the TEMPO-system. Although there was no gain in carboxyls content in this process versus the oxidation with TEMPO-system without ultrasound treatment, a higher degree of fibrillation was obtained after ultrasound treatment. In the third case the TEMPO oxidized pulp was subjected to mechanical and ultrasound treatments for nanocellulose production. Under similar treatment time the subsequent ultrasound treatment achieved higher nanocellulose yield than the subsequent mechanical treatment. However, in comparison, the ultrasound treated nanocellulose had lower Rheometer Stresstech viscosity. Furthermore, it was observed that cellulose nanofibrils produced by ultrasound treatment were slightly thinner compared to those produced using the mechanical method.