Addressing LiDAR overlap for Diameter at Breast Height estimation using a Point-Cloud Processing Software

被引:0
|
作者
Zaragosa, Gio P. [1 ]
Paringit, Enrico C. [1 ]
Ibanez, Carlyn Ann G. [1 ]
Faelga, Regine Anne G. [1 ]
Argamosa, Reginald Jay L. [1 ]
Posilero, Mark Anthony V. [1 ]
Tandoc, Fe Andrea M. [1 ]
Malabanan, Matthew V. [1 ]
机构
[1] Univ Philippines, Diliman,Quezon City 1001, Manila, Philippines
关键词
LiDAR; Overlap; DBH Estimation; Point Density; Forestry;
D O I
10.1117/12.2223699
中图分类号
TP7 [遥感技术];
学科分类号
081102 ; 0816 ; 081602 ; 083002 ; 1404 ;
摘要
LiDAR Overlap is the area that is common to two or more flight lines. This is essential to ensure the continuity of data as the acquisition moves from one flight line to another. Looking into overlaps is important when doing DBH Estimation using point cloud data because it doubles the density of points in the overlap region. To remove this effect when determining the DBH of a forest area, the LiDAR data was processed using a point-cloud processing software. The processes include separating flight lines using the GPS time when the points were acquired. After separating, the number of points in the overlap region were decreased by removing excess points within the area of twice the point spacing. The parameters needed for DBH estimation were then obtained. The absolute number of points in the whole overlap area was originally 4,960,726 after decreasing the number of points, it was reduced to 1,479,884. The number of points would have an effect on DBH estimation because the values obtained were significantly different at 95% level of confidence.
引用
收藏
页数:14
相关论文
共 46 条
  • [1] LiDAR point-cloud processing based on projection methods: a comparison
    Yang, Guidong
    Mentasti, Simone
    Bersani, Mattia
    Wang, Yafei
    Braghin, Francesco
    Cheli, Federico
    [J]. 2020 AEIT INTERNATIONAL CONFERENCE OF ELECTRICAL AND ELECTRONIC TECHNOLOGIES FOR AUTOMOTIVE (AEIT AUTOMOTIVE), 2020,
  • [2] Online Estimation of Diameter at Breast Height (DBH) of Forest Trees Using a Handheld LiDAR
    Proudman, Alexander
    Ramezani, Milad
    Fallon, Maurice
    [J]. 10TH EUROPEAN CONFERENCE ON MOBILE ROBOTS (ECMR 2021), 2021,
  • [3] The Influence of Cross-Section Thickness on Diameter at Breast Height Estimation from Point Cloud
    Koren, Milan
    Huncaga, Milan
    Chuda, Juliana
    Mokrog, Martin
    Surovy, Peter
    [J]. ISPRS INTERNATIONAL JOURNAL OF GEO-INFORMATION, 2020, 9 (09)
  • [4] Single Tree Segmentation and Diameter at Breast Height Estimation With Mobile LiDAR
    Liu, Lulu
    Zhang, Aiwu
    Xiao, Shen
    Hu, Shaoxing
    He, Nianpeng
    Pang, Haiyang
    Zhang, Xizhen
    Yang, Shikai
    [J]. IEEE ACCESS, 2021, 9 : 24314 - 24325
  • [5] Analysis of Parameters for the Accurate and Fast Estimation of Tree Diameter at Breast Height Based on Simulated Point Cloud
    Wang, Pei
    Gan, Xiaozheng
    Zhang, Qing
    Bu, Guochao
    Li, Li
    Xu, Xiuxian
    Li, Yaxin
    Liu, Zichu
    Xiao, Xiangming
    [J]. REMOTE SENSING, 2019, 11 (22)
  • [6] Point-Cloud Processing Using Modified Rodrigues Parameters for Relative Navigation
    Bercovici, Benjamin
    McMahon, Jay W.
    [J]. JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 2017, 40 (12) : 3167 - 3179
  • [7] Pose Estimation of Mobile Robot Using Image and Point-Cloud Data
    An, Sung Won
    Park, Hong Seong
    [J]. JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2024, : 5367 - 5377
  • [8] Hybrid Overlap Filter for LiDAR Point Clouds Using Free Software
    Bujan, Sandra
    Cordero, Miguel
    Miranda, David
    [J]. REMOTE SENSING, 2020, 12 (07)
  • [9] Breast Height Diameter Estimation From High-Density Airborne LiDAR Data
    Bucksch, Alexander
    Lindenbergh, Roderik
    Abd Rahman, Muhammad Zulkarnain
    Menenti, Massimo
    [J]. IEEE GEOSCIENCE AND REMOTE SENSING LETTERS, 2014, 11 (06) : 1056 - 1060
  • [10] Tree Diameter at Breast Height Extraction Based on Mobile Laser Scanning Point Cloud
    Sheng, Yuhao
    Zhao, Qingzhan
    Wang, Xuewen
    Liu, Yihao
    Yin, Xiaojun
    [J]. FORESTS, 2024, 15 (04):