Comparison of mechanical properties of martensite/ferrite and bainite/ferrite dual phase 4340 steels

被引：103
|
作者：
Saeidi, N. [1 ]
Ekrami, A. [1 ]
机构：
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 523卷 / 1-2期
关键词：
Dual phase steel; Intercritical annealing; Charpy impact energy; ULTRAHIGH STRENGTH STEEL; TEMPERATURE; IMPROVEMENT; BAINITE;
D O I：
10.1016/j.msea.2009.06.057
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Different microstructures were produced by heat treatment of 4340 steel. These microstructures are bainite, martensite, ferrite-martensite and ferrite-bainite. Mechanical tests were carried out at room temperature. The results showed that steel with bainite-ferrite microstructure has better ductility and charpy impact energy than steels with martensite-ferrite and full bainite microstructures. But yield and tensile strengths of this steel are less than the yield and tensile strengths of the other two steels. Hardness measurements showed that their hardness is the same. Fracture surface observations of tensile specimens showed increase in toughness of bainite-ferrite in comparison to martensite-ferrite and full bainite microstructures. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：125 / 129
页数：5
相关论文
共 50 条
  • [1] Effect of martensite on the mechanical behavior of ferrite-bainite dual phase steels
    Podder, A. Saha
    Bhattacharjee, D.
    Ray, R. K.
    [J]. ISIJ INTERNATIONAL, 2007, 47 (07) : 1058 - 1064
  • [2] Comparison of the fatigue performance of ferrite–pearlite and ferrite–bainite dual-phase steels
    Jeong Yeol Park
    Dong Jin Oh
    Myung Hyun Kim
    [J]. Journal of Marine Science and Technology, 2021, 26 : 344 - 356
  • [3] Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel
    Gurumurthy, B. M.
    Sharma, Sathya Shankar
    Kini, Achutha
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 24907 - 24914
  • [4] Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite
    Park, Myeong-heom
    Shibata, Akinobu
    Tsuji, Nobuhiro
    [J]. MRS ADVANCES, 2016, 1 (12): : 811 - 816
  • [5] Effect of Grain Size on Mechanical Properties of Dual Phase Steels Composed of Ferrite and Martensite
    Myeong-heom Park
    Akinobu Shibata
    Nobuhiro Tsuji
    [J]. MRS Advances, 2016, 1 (12) : 811 - 816
  • [6] STRENGTH AND DUCTILITY OF FERRITE BAINITE MARTENSITE STEELS
    SUGIMOTO, K
    SAKAKI, T
    KURIHASHI, T
    MIYAGAWA, O
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (15): : 2101 - 2108
  • [7] Impact properties of tempered bainite-ferrite dual phase steels
    Saeidi, N.
    Ekrami, A.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (21-22): : 5575 - 5581
  • [8] Influence of martensite volume fraction on tensile properties of triple phase ferrite-bainite-martensite steels
    Zare, Ahmad
    Ekrami, A.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 530 : 440 - 445
  • [9] Comparison of the fatigue performance of ferrite-pearlite and ferrite-bainite dual-phase steels
    Park, Jeong Yeol
    Oh, Dong Jin
    Kim, Myung Hyun
    [J]. JOURNAL OF MARINE SCIENCE AND TECHNOLOGY, 2021, 26 (02) : 344 - 356
  • [10] Quantitative Crystallographic Characterization of Boundaries in Ferrite-Bainite/Martensite Dual-Phase Steels
    Li Xiucheng
    Sun Mingyu
    Zhao Jingxiao
    Wang Xuelin
    Shang Chengjia
    [J]. ACTA METALLURGICA SINICA, 2020, 56 (04) : 653 - 660
12345