PULSED VACUUM ARC PLASMA DEPOSITION OF FILMS AND PARTICLES AT DIFFERENT PRESSURES AND TEMPERATURES

被引：1
|
作者：
Amrenova, A. U. [1 ]
Zhukeshov, A. M. [1 ]
Ibraev, B. M. [1 ]
Gabdullina, A. T. [1 ]
Useinov, B. M. [2 ]
Mukhamedryskyzy, M. [1 ]
Fermakhan, K. [1 ]
机构：
[1] Al Farabi Kazakh Natl Univ, 71 Al Farabi Ave, Alma Ata 050040, Kazakhstan
[2] North Kazakhstan State Univ, Petropavlovsk, Kazakhstan
来源：
HIGH TEMPERATURE MATERIAL PROCESSES | 2020年 / 24卷 / 02期
关键词：
pulsed plasma; arc sprayer; vacuum; deposition; nanoparticles;
D O I：
10.1615/HighTempMatProc.2020034924
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The conditions of powder and film deposition at different pressures in the working chamber and the influence of substrate temperature in using of vacuum arc discharge are investigated. The experiments were carried out on a VAS-1 vacuum arc sprayer with known parameters of discharge circuit. The optimal pressure regime for deposition of thin films of nanoscale thickness was 10(-3) mbar or below. The calculated estimation time for film deposition ratio was about 1 mu m/min. In the experiment the thin layers of copper at pressure 10(-4) mbar was observed. When a plasma was produced on a cold substrate, a continuous film was not observed. The optimal pressure for producing nanopowders was equal to 10(-2) mbar; particle agglomeration and the formation of a fractal structure were observed at this pressure. Individual spherical particles with a size of 100-600 nm were deposited at a pressure of 10(-3) mbar. In their composition, elements of a substrate and electrode materials were found. The recommendations for choosing optimal modes to obtain nanosize coatings by the vacuum arc method and technological conditions for obtaining nanopowders using the pulse installation for industrial application was given.
引用
收藏
页码：157 / 165
页数：9
相关论文
共 50 条
  • [1] Deposition of superhard amorphous carbon films by pulsed vacuum arc deposition
    Schultrich, B
    Scheibe, HJ
    Drescher, D
    Ziegele, H
    SURFACE & COATINGS TECHNOLOGY, 1998, 98 (1-3): : 1097 - 1101
  • [2] THE USE OF PULSED VACUUM ARC PLASMA FOR THE SYNTHESIS OF HOLLOW SPHERICAL PARTICLES
    Zhukeshov, A. M.
    Fermakhan, K.
    Gabdullina, A. T.
    Amrenova, A. U.
    Dauyt, N. N.
    Nazar, E. A.
    HIGH TEMPERATURE MATERIAL PROCESSES, 2021, 25 (02): : 1 - 7
  • [3] Mechanical properties of Diamond-like Carbon (DLC) films synthesized by pulsed vacuum arc plasma deposition
    Leng, YX
    Huang, N
    Sun, H
    Chen, JY
    Zhu, MH
    Shi, XY
    Qiu, SY
    CONTRIBUTIONS OF SURFACE ENGINEERING TO MODERN MANUFACTURING AND REMANUFACTURING, 2002, : 302 - 305
  • [4] The use of pulsed vacuum arc deposition method for making films of various materials
    Tochitsky, EI
    Gasenkova, IV
    Milashevskaya, IG
    Selifanov, OV
    Stankevich, EV
    ISDEIV: XVIIITH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM - PROCEEDINGS, VOLS 1 AND 2, 1998, 18 : 601 - 604
  • [5] Rutile titanium dioxide films deposited with a vacuum arc at different temperatures
    Franco Arias, L.
    Kleiman, A.
    Heredia, E.
    Marquez, A.
    14TH LATIN AMERICAN WORKSHOP ON PLASMA PHYSICS (LAWPP 2011), 2012, 370
  • [6] Vacuum arc deposition of Mo films
    Vershinin, N
    Straumal, B
    Gust, W
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1996, 14 (06): : 3252 - 3255
  • [7] Mechanical properties and thermomechanical stability of diamond-like carbon films synthesized by pulsed vacuum arc plasma deposition
    Leng, YX
    Chen, JY
    Yang, P
    Sun, H
    Wan, GJ
    Huang, N
    SURFACE & COATINGS TECHNOLOGY, 2003, 173 (01): : 67 - 73
  • [8] INVESTIGATION OF CARBON THIN FILMS BY PULSED LASER DEPOSITION AT DIFFERENT TEMPERATURES
    Qindeel, Rabia
    Chaudhary, K. T.
    Bhatti, K. A.
    Hussain, M. S.
    Ali, Jalil
    JOURNAL OF NON-OXIDE GLASSES, 2010, 2 (04): : 191 - 197
  • [9] Carbon Thin Films Deposition by KrF Pulsed Laser at Different Temperatures
    Qindeel, Rabia
    Bin Ali, Jalil
    Hussain, M. S.
    Chaudhary, K. T.
    ENABLING SCIENCE AND NANOTECHNOLOGY, 2011, 1341 : 199 - +
  • [10] Investigation of Carbon thin films by pulsed laser deposition at different temperatures
    Qindeel, R.
    Chaudhary, K. T.
    Bhatti, K. A.
    Hussain, M. S.
    Ali, Jalil
    Saktioto
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2010, 4 (11): : 1728 - 1732
12345