Optimal design of optical system for LED road lighting with high illuminance and luminance uniformity

被引：37
|
作者：
Hu, Xiaojia [1 ]
Qian, Keyuan [1 ]
机构：
[1] Tsinghua Univ, Semicond Lighting Lab, Grad Sch Shenzhen, Shenzhen 518055, Guangdong, Peoples R China
来源：
APPLIED OPTICS | 2013年 / 52卷 / 24期
关键词：
LENS;
D O I：
10.1364/AO.52.005888
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
A new method is proposed to achieve high illuminance and luminance uniformity of the road surface in LED road lighting. Based on the reflection properties of the road surface, the illuminance and luminance are analyzed simultaneously with the least-square method; meanwhile, energy efficiency and glare requirements are considered. Through the analysis and calculations, the optimal light distribution of a luminaire is obtained, and then a freeform lens with this light distribution is designed. For a 2-lane C1 class road illuminated by LED luminaires mounted with these lenses, the overall illuminance and luminance uniformity on the road surface can reach over 0.9 and 0.85, respectively, and the glare factors less than 10%. (C) 2013 Optical Society of America
引用
收藏
页码：5888 / 5893
页数：6
相关论文
共 50 条
  • [1] Design of LED freeform optical system for road lighting with high luminance/illuminance ratio
    Feng, Zexin
    Luo, Yi
    Han, Yanjun
    [J]. OPTICS EXPRESS, 2010, 18 (21): : 22020 - 22031
  • [2] Study of the optical systems with illuminance and luminance uniformity simultaneously for LED lighting
    Graduate School at Shenzhen, Tsinghua University, Shenzhen
    Guangdong
    518055, China
    [J]. Guangxue Xuebao, 2
  • [3] Optimal Optical Design of UV-LED Curing System with High Illumination and Luminance Uniformity
    Wang, Peipei
    Jin, Zhiliang
    Xiong, Daxi
    [J]. 2018 15TH CHINA INTERNATIONAL FORUM ON SOLID STATE LIGHTING: INTERNATIONAL FORUM ON WIDE BANDGAP SEMICONDUCTORS CHINA (SSLCHINA: IFWS), 2018, : 105 - 108
  • [4] DESIGN OF ROAD LIGHTING FOR GIVEN LUMINANCE AND UNIFORMITY
    VERMEULEN, J
    KNUDSEN, B
    [J]. PHILIPS TECHNICAL REVIEW, 1968, 29 (10): : 299 - +
  • [5] Illuminance uniformity in obstructed LED surgical lighting
    Zhou, H.
    Ding, R.
    Qin, J.
    Pan, Y.
    Wang, M.
    [J]. LIGHTING RESEARCH & TECHNOLOGY, 2022, 54 (08) : 819 - 828
  • [6] Designing an LED luminaire with balance between uniformity of luminance and illuminance for non-Lambertian road surfaces
    [J]. Sun, Wen-Shing (wssun@dop.ncu.edu.tw), 2017, OSA - The Optical Society (56)
  • [7] Designing an LED luminaire with balance between uniformity of luminance and illuminance for non-Lambertian road surfaces
    Teng, Tun-Chien
    Sun, Wen-Shing
    Lin, Jhih-Li
    [J]. APPLIED OPTICS, 2017, 56 (10) : 2604 - 2613
  • [8] Design of optical lens for LED road lighting
    Lin, Chi-Feng
    Fang, Yu-Bin
    Chen, Tao-Hsing
    [J]. TWELFTH INTERNATIONAL CONFERENCE ON SOLID STATE LIGHTING AND FOURTH INTERNATIONAL CONFERENCE ON WHITE LEDS AND SOLID STATE LIGHTING, 2012, 8484
  • [9] The effect of luminance uniformity on visibility level in road lighting
    Güler, Ö.
    Onaygil, S.
    [J]. Lighting Research and Technology, 2003, 35 (03): : 199 - 213
  • [10] Road lighting research for drivers and pedestrians: The basis of luminance and illuminance recommendations
    Fotios, S.
    Gibbons, R.
    [J]. LIGHTING RESEARCH & TECHNOLOGY, 2018, 50 (01) : 154 - 186
12345