Notch Effects in High Cycle Fatigue of Ti-6A1-4V

被引：10
|
作者：
Shojima, K. [1 ]
Weldle, S. [2 ,3 ]
Okazaki, S. [1 ]
Endo, M. [1 ,3 ]
Eifler, D. [2 ,3 ]
Balle, F. [1 ]
机构：
[1] Fukuoka Univ, Dept Mech Engn, Fukuoka, Japan
[2] Univ Kaiserslautern, Inst Mat Sci Engn, Kaiserslautern, Germany
[3] Fukuoka Univ, Inst Mat Sci Technol, Fukuoka, Japan
来源：
ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, (IFAMST-8) | 2013年 / 750卷
关键词：
Ti-6AI-4V; notch effect root area -parameter model; high cycle fatigue; STRENGTH;
D O I：
10.4028/www.scientific.net/MSF.750.232
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, a series of experimental studies was conducted to investigate the fatigue behavior of Ti-6A1-4V alloy at room temperature. Specifically, by inspecting the cylindrical specimens with a circumferential notch of different depths (20-200 mu m) and notch root radii (20-100 mu m), the notch effect was systematically investigated with tension-compression fatigue tests (R = 1). To quantify the effects of small notch, the root area -parameter model was adopted and its applicability for Ti-6A1-4V alloy was examined. Finally, the fatigue characteristics are discussed in conjunction with the behavior of small fatigue cracks at notches. d
引用
收藏
页码：232 / +
页数：2
相关论文
共 50 条
  • [1] Notch fatigue behavior of Ti-6A1-4V alloy in transition region between low and high cycle fatigue
    Htoo, Aye Thant
    Miyashita, Yukio
    Otsuka, Yuichi
    Mutoh, Yoshiharu
    Sakurai, Shigeo
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 95 : 194 - 203
  • [2] Effect of predamage from low cycle fatigue on high cycle fatigue strength of Ti-6A1-4V
    Mall, S
    Nicholas, T
    Park, TW
    INTERNATIONAL JOURNAL OF FATIGUE, 2003, 25 (9-11) : 1109 - 1116
  • [3] Effect of Rolling Process on High Cycle Fatigue Property of Ti-6A1-4V Sheet
    Wang Juanhua
    Chen Yonghui
    Wang Hongwu
    Liu Pingping
    Wang Wenjun
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1199 - 1201
  • [4] EFFECTS OF PRECOATING SURFACE TREATMENTS ON FATIGUE OF TI-6A1-4V
    EBERHARDT, AW
    KIN, BS
    RIGNEY, D
    KUTNER, GL
    HARTE, CR
    JOURNAL OF APPLIED BIOMATERIALS, 1995, 6 (03) : 171 - 174
  • [5] SURFACE EFFECTS DURING FRETTING FATIGUE OF TI-6A1-4V
    MALKIN, S
    COURTNEY, TH
    MAJORS, DP
    WEAR, 1972, 22 (02) : 235 - &
  • [6] Effects of Microstructural Anisotropy on the Dwell Fatigue Life of Ti-6A1-4V bar
    Mori, Kenichi
    Hashimoto, Shohtaroh
    Miyahara, Mitsuo
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2020, 107 (03): : 257 - 267
  • [7] Fatigue behavior of Ti-6A1-4V ELI including mean stress effects
    Carrion, Patricio E.
    Shamsaei, Nima
    Daniewicz, Steven R.
    Moser, Robert D.
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 99 : 87 - 100
  • [8] Surface roughness of Ti-6A1-4V parts obtained by SLM and EBM: Effect on the High Cycle Fatigue life
    Vayssette, Bastien
    Saintier, Nicolas
    Brugger, Charles
    Elmay, Mohamed
    Pessard, Ettienne
    7TH INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2017, 2018, 213 : 89 - 97
  • [9] Effect of Trace B Addition on Hot Workability and High-Cycle Fatigue Property of Ti-6A1-4V Alloy
    Kitaura, T.
    Hagiwara, M.
    Kano, O.
    Ono, Y.
    Yuri, T.
    Ogata, T.
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1021 - 1024
  • [10] Designing very high-cycle fatigue specimens of additively manufactured Ti-6A1-4V with different porosities and microstructures
    Brot, Gregoire
    Favier, Veronique
    Koutiri, Imade
    Bonnand, Vincent
    Dupuy, Corinne
    Ranc, Nicolas
    Lefebvre, Fabien
    9TH EDITION OF THE INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2021, 2022, 38 : 604 - 610
12345