Performance analysis of a micro-combined heating and power system with PEM fuel cell as a prime mover for a typical household in North China

Proton exchange membrane (PEM) fuel cells produce a large amount of waste heat while generating electricity through electrochemical reactions, making them suitable for driving combined heating and power (CHP) systems. According to the hourly thermal and electric loads in a typical North China household, a 2-kW PEM fuel cell-based micro-CHP system with a lithium-ion battery energy storage system is proposed in this paper. The thermal and economic performances of the micro-CHP system with a lithium-ion battery (CHPWB) and a CHP system without a lithium-ion battery (CHPWOB) are comparatively analyzed by developing a thermal and economic performance analysis model on the MATLAB/Simulink platform. The thermal-load-following strategy is adopted during the design and simulation process. The results indicate that the storage capacity of the lithium-ion battery decreases by 6.6% after one cycle. The lithium-ion battery can be charged by the fuel cell stack during off-peak hours or using commercial electricity, and the charging cycle of the system is one week long. The average total efficiency of the CHPWB system can reach 81.24% with considering the energy loss in each conversion process, which is 11.02% higher than that of the CHPWOB system. The daily hydrogen consumption of the CHPWB system can be reduced by 14.47% compared with the CHPWOB system under the same operating conditions, and the average daily costs can be reduced by 8.4% and 9.5% when the lifespan is 10 and 15 years, respectively. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.