Tool Life Evaluation of Cutting Materials in Turning of X20Cr13 Stainless Steel

被引：1

作者：

Bouzid, Lakhdar ^{[1
,2
]}

Yallese, Mohamed Athmane ^{[1
]}

Belhadi, Salim ^{[1
]}

Boulanouar, Lakhdar ^{[3
]}

机构：

[1] 8 May Univ Guelma, Mech & Struct Lab LMS, BP 401, Guelma 24000, Algeria

[2] Univ Larbi Ben MHidi, Oum El Bouaghi, Algeria

[3] Badji Mokhtar Univ Annaba, Res Lab Adv Technol Mech Prod LRTAPM, Annaba, Algeria

来源：

APPLIED MECHANICS, BEHAVIOR OF MATERIALS, AND ENGINEERING SYSTEMS | 2017年

关键词：

Carbide cutting tools - Carbides - Stainless steel - Turning;

D O I：

10.1007/978-3-319-41468-3_37

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The aim of this experimental study is to evaluate the tool life of each cutting material used in dry turning of X20Cr13 steel. The tests of straight turning were carried out using the following cutting materials: CVD coated carbide (GC2015) and PVD coated carbide (GC1015). Experimental results enable us to study the influence of machining time on flank wear VB of these cutting materials and to determine their lifespan for this cutting regime (depth of cut ap = 0.2 mm, feed rate f = 0.08 mm/rev and cutting speed Vc = 280 m/min). It arise that CVD coated carbide (insert GC2015) is more resistant to wear than cutting materials. Its tool life is 65 min and consequently, it is the most powerful.

引用

页码：447 / 452

页数：6

共 50 条

[1] Economic Optimization of the Tool Life and the Cutting Speed at Drilling of the Stainless Steel X20Cr13
Ovidiu, Blajina
Aurelian, Vlase
Marius, Iacob
CRAFTING GLOBAL COMPETITIVE ECONOMIES: 2020 VISION STRATEGIC PLANNING & SMART IMPLEMENTATION, VOLS I-IV, 2014, : 251 - 255
[2] Optimization of the Tool Life and the Cutting Speed for Maximum Productivity at Drilling of the Stainless Steel X20Cr13
Ovidiu, Blajina
Aurelian, Vlase
Marius, Iacob
CRAFTING GLOBAL COMPETITIVE ECONOMIES: 2020 VISION STRATEGIC PLANNING & SMART IMPLEMENTATION, VOLS I-IV, 2014, : 256 - 260
[3] Influence of Cutting Fluids on the Corrosion Resistance of X20Cr13 Martensitic Stainless Steel
Kostadin, Tihana
Cukor, Goran
Jurkovic, Zoran
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (12): : 11986 - 11999
[4] Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel
Lakhdar Bouzid
Smail Boutabba
Mohamed Athmane Yallese
Salim Belhadi
Francois Girardin
The International Journal of Advanced Manufacturing Technology, 2014, 74 : 879 - 891
[5] Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel
Bouzid, Lakhdar
Boutabba, Smail
Yallese, Mohamed Athmane
Belhadi, Salim
Girardin, Francois
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 74 (5-8): : 879 - 891
[6] Sustainable Machining: MQL Technique Combined with the Vortex Tube Cooling When Turning Martensitic Stainless Steel X20Cr13
Valic, Graciela Sterpin
Kostadin, Tihana
Cukor, Goran
Fabic, Marko
MACHINES, 2023, 11 (03)
[7] Analysis of corrosion resistance when turning martensitic stainless steel X20Cr13 under chilled air-cooling
Kostadin, T.
Cukor, G.
Jakovljevic, S.
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2017, 12 (02): : 105 - 114
[8] Constitutive modeling of hot deformation behavior of X20Cr13 martensitic stainless steel with strain effect
Ren, Fa-cai
Chen, Jun
Chen, Fei
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (05) : 1407 - 1413
[9] Research through the Stationary Specimen Method of the X20Cr13 Stainless Steel used for Hydraulic Pumps
Nedeloni, Marian-Dumitru
Potoceanu, Nadia
Florea, Danut
Chirus, Daniel
METALLOGRAPHY XV, 2014, 782 : 251 - +
[10] The influence of plasma nitriding on the resistance of X20Cr13 steel to cavitation erosion
Krella, A. K.
Ratajski, J.
WEAR, 2025, 564

← 1 2 3 4 5 →