Studies on Triple Base Gun Propellant Based on Two Energetic Azido Esters

Triple base propellant is the workhorse propellant because it possesses several advantages like reduced flash, flame temperature, and erosion of the barrel as compared to double and single base propellant. Hence, efforts are going on worldwide to increase its performance by increasing its energy using energetic plasticizers and binders. In the present article, nonenergetic plasticizer dibutyl phthalate (DBP) is replaced by two energetic azido ester plasticizers, tris(azido acetoxy methyl) propane (TAAMP) and bis(azido acetoxy) bis(azido methyl) propane (BABAMP), in triple base composition and their different properties are studied. Experimental closed vessel (CV) results (loading density 0.2 g/cm3) clearly indicate that the triple base composition with 2% DBP has force constant 1018J/g, which is increased to 1026 and 1030J/g on replacement of DBP by 1 and 2% TAAMP, respectively. Mechanical properties of propellant compositions containing 1 and 2% TAAMP (compression strength 279 and 291kgf/cm2, percentage compression 11.2 and 10.5, respectively) are also better than those of composition containing DBP (compression strength 275kgf/cm2 and 10.3% compression). Similarly, 1 and 2% replacement of DBP by BABAMP shows further rise in energy (1032J/g, 1038J/g respectively) than that of compositions containing 1 and 2% TAAMP. These two compositions also exhibit better mechanical properties (compression strength 311.2 and 312.3kgf/cm2, % compression 11.0 and 10.5, respectively) than compositions containing 1 and 2% TAAMP. The differential thermal analysis (DTA) results brought out the fact that the compositions containing energetic plasticizers revealed maximum decomposition temperature in the range of 172-174C which is close to DBP plasticized triple base gun propellants (174C). The energetic plasticized propellant compositions of both (TAAMP and BABAMP) showed sensitivity data in the range of (H50 19 to 22cm, F of I 25 to 29 and friction insensitivity 19.2kg) acceptable limit for gun propellant.