Mechanical stabilization of retained austenite in TRIP-assisted multiphase steels

被引:0
|
作者
Godet, S [1 ]
Delannay, F [1 ]
Jacques, PJ [1 ]
机构
[1] Univ Catholique Louvain, B-1348 Louvain, Belgium
关键词
D O I
暂无
中图分类号
O414.1 [热力学];
学科分类号
摘要
TRIP-assisted multiphase steels exhibit strength and ductility properties that are unique in low-alloy steels. This behaviour is attributed to the dynamic work-hardening provided by the transformation of metastable retained austenite into martensite during straining. Usually two main factors are thought to influence the stability of austenite: its chemical composition and its grain size. This work characterises the effect of a third parameter on its stability: prior deformation and high temperature work-hardening of austenite. Specimens were strained into the intercritical temperature range and then submitted to a bainitic transformation dwell. Typical multiphase microstructure were obtained. The work-hardening behaviour of the steels grades strained at room temperature was found to be enhanced by the prior deformation of austenite.
引用
收藏
页码:535 / 538
页数:4
相关论文
共 50 条
  • [1] The significance of retained austenite for the improvement of the mechanical properties of TRIP-assisted multiphase steels
    Jacques, PJ
    [J]. HEAT TREATING, VOLS 1 AND 2, PROCEEDINGS, 2000, : 539 - 546
  • [2] Influence of the mechanical stability of retained austenite on the damaging micromechanisms in TRIP-assisted multiphase steels
    Furnémont, Q
    Jacques, P
    Pardoen, T
    Delannay, F
    [J]. ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 859 - 864
  • [3] Stability of retained austenite in TRIP-assisted steels
    Sherif, MY
    Mateo, CG
    Sourmail, T
    Bhadeshia, HKDH
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (03) : 319 - 322
  • [4] On the influence of aluminium content on the stability of retained austenite in multiphase TRIP-assisted steels
    Mertens, A
    Jacques, P
    Lazarova, R
    Zhao, L
    Sietsma, J
    Delannay, F
    [J]. JOURNAL DE PHYSIQUE IV, 2001, 11 (PR8): : 223 - 228
  • [5] A Micromechanical Study of the Deformation Behavior of TRIP-Assisted Multiphase Steels as a Function of the Microstructural Parameters of the Retained Austenite
    Tjahjanto, Denny
    Turteltaub, Sergio
    Suiker, Akke
    van der Zwaag, Sybrand
    [J]. ADVANCED ENGINEERING MATERIALS, 2009, 11 (03) : 153 - 157
  • [6] On the role of metastable austenite in enhancing the properties of TRIP-assisted multiphase steels
    Jacques, P
    Harlet, P
    Delannay, F
    [J]. EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1: METALS AND COMPOSITES, 1997, : 641 - 644
  • [7] The developments of cold-rolled TRIP-assisted multiphase steels. Low silicon TRIP-assisted multiphase steels
    Jacques, PJ
    Girault, E
    Harlet, P
    Delannay, F
    [J]. ISIJ INTERNATIONAL, 2001, 41 (09) : 1061 - 1067
  • [8] The developments of cold-rolled TRIP-assisted multiphase steels. Al-alloyed TRIP-assisted multiphase steels
    Jacques, PJ
    Girault, E
    Mertens, A
    Verlinden, B
    van Humbeeck, J
    Delannay, F
    [J]. ISIJ INTERNATIONAL, 2001, 41 (09) : 1068 - 1074
  • [9] The fracture toughness of TRIP-assisted multiphase steels
    Lacroix, G.
    Pardoen, T.
    Jacques, P. J.
    [J]. ACTA MATERIALIA, 2008, 56 (15) : 3900 - 3913
  • [10] The role and significance of martensite on the mechanical properties of TRIP-assisted multiphase steels
    Jacques, P
    Furnemont, Q
    Pardoen, T
    Delannay, F
    [J]. ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS, 2000, : 823 - 828