One-Step Pyrolysis Fabrication of Magnetic Bagasse Biochar Composites with Excellent Lead Adsorption Performance

In the present study, a magnetically separable adsorbent, manganese ferrite (MnFe2O4)/sugarcane bagasse biochar magnetic composites (MFSCBB-MCs), was fabricated through a one-step pyrolysis method. The characterization of the prepared adsorbents indicated that MnFe2O4 nanoparticles were successfully embedded into the biochar matrix, offering magnetic separability and increasing the negative charges on the surface relative to the pristine biochar. Batch adsorption tests indicated that the adsorption of lead on MFSCBB-MCs was pH-and dose-dependent. The experimental results were effectively fitted using the pseudo-second-order kinetic model (R2 > 0.99) and the Langmuir isotherm equation (R2 > 0.99), indicating the main chemisorption pathway and monolayer coverage process. Meanwhile, lead adsorption was found to be spontaneous and endothermic, as shown by the study of thermodynamic parameters. The maximum capacity, qm, calculated from the Langmuir model was 155.21 mg center dot g-1 at 25 degrees C, demonstrating excellent adsorption capability compared with several previously reported bagasse adsorbents. Based on adsorption mechanism analysis, physical adsorption, electrostatic attraction, and complexation were all involved in the lead(II) adsorption process on MFSCBB-MCs. Furthermore, the adsorbent was easily regenerated as indicated by the high magnetic separation and chemical desorption potential after five cycles, so it is a cost-effective and environmentally favorable adsorbent for wastewater lead removal.